Hi all,

I've tried searching, but can't find anything which gives the Vigor 130 throughput... can anyone point me in the right direction?

I have one running on 8Mb ADSL and will be transferring to 80Mb VDSL soon - which I'm sure is fine.

However, at the rate things are changing, my exchange will be offering me faster and faster fibre until I get to 10Gb (just kidding) - but - what's the device's limit, so I know it's limit (I'd rather run at 75% of a limit, than 99%)

Thanks!

The Vigor130 is profile 17a which delivers up to 100Mbit/s .

Facts, figures and charts here :

https://en.wikipedia.org/wiki/Very-high-bit-rate_digital_subscriber_line


It will handle Vectoring though BT seem to be abandoning that now, not sure about GFast which is being developed and tested.

I use this model on 80/20 FTTC and it performs beautifully.

Connections in the 30a profile are FTTH/P , you won't want a modem for that.

AdrianH54 wrote: The Vigor130 is profile 17a which delivers up to 100Mbit/s

Thanks!

AdrianH54 wrote:
I use this model on 80/20 FTTC and it performs beautifully.

That's exactly what I'll be doing - good to know it's going to work :wink:

I've been running a 130 through to an old Netgear (with Tomato firmware) and the switch from ADSL to VDSL2 was seamless (Zen Internet as my ISP).

It's been steady at 80/20 non-stop for 5+ months now.

StefanH wrote: I've been running a 130 through to an old Netgear (with Tomato firmware) and the switch from ADSL to VDSL2 was seamless (Zen Internet as my ISP).
It's been steady at 80/20 non-stop for 5+ months now.

Good isn't it . 8)