I've been following the Draytek document for setting up SKY to work on my Draytek Vigor 2760 but I cannot get it working, it simply shows as a failed connection.

I've got the details for both flags 60 and 61 using Wireshark and the information I'm using is comparative to the images in the guide but nothing works.


Has anybody still got this working, if so could somebody please tell me if the guide is missing a key step or something?



note: firmware is v3.7.8.1 in my router which is newer than the specified v3.7.5.1


I would really prefer to use this router than the rubbish modem SKY provide.

Not familiar with the 2760, but if you are specifying the DHCP options, then you should be fine, examples from my 2925:

WAN | Internet Access | (advanced button)

WAN1: option 61: ASCII: (1ab3b4geh6f320)@skydsl|(5dfw4av6z)
WAN1: option 60: ASCII: 2.1r.3727.R|001|SR102|(A123458A123456)
**The brackets I've added, and faked the numbers/letters inside of them**


WAN | Internet Access | WAN1 (details page button)

Static or Dynamic Tab
WAB connection mode: ARP Detect
MTU: 1500
WAN IP Settings: obtain IP automatically
Specifiy MAC address: (use the Sky router MAC)



In have used LLU and Fibre via Sky with this approach.