Hi Draytek router Dev team

Maybe you could consider increasing the number of SNMP sensors available on the routers to maybe include:-

WAN 1/2/3 uptime
WAN 1/2/3 sync speeds
WAN 1/2/3 CRC errors

We mainly use PRTG to collect statistics and these would be most useful to identify trends and problems sites for further investigations as currently the router UI only gives a snapshot at that particular time or since the last reboot
Thanks for your consideration

This is available in current firmware and I believe has been there since the Vigor 2820 or earlier series, the WAN1 ADSL values are in this OID set: .1.3.6.1.2.1.10.94.1
You will need to download the SNMP MIBs from the DrayTek UK downloads page to determine which values are which, most SNMP applications can load these MIBs to give descriptive names to each OID.

thanks for the info
let me request this to our SNMP/PRTG admins here
Thanks

Its been a while since i looked at this but we still have no way of tracking :-
WAN uptime (for xDSL)
WAN CRC errors
they are not in the list of OID values


Both these values are reset on a loss of DSL sync -so would be good to be able to log them with SNMP to see longer term trends

Thanks