I am having trouble with Inter-LAN routing Configuration

I have a 2860 router with LAN1 address 192.168.2.41/24

Devices on LAN1 (192.168.2.xxx) are plugged into P1 to P5 and have access to the WAN on ADSL.

I need some of these devices to be able to connect to devices on 10.64.114.xxx/24. For testing, I have a single device 10.64.114.1/24 on P6.

I have added LAN4 address 10.64.114.1/24 to the 2860 configuration and set Inter-LAN routing Configuration to link LAN1 and LAN4



I have enabled VLAN and set VLAN0 wit P1 to P5 on LAN1. VLAN3 uses P6 and LAN4. VLAN tags are disabled.


The router can ping 192.168.2.22 on P2 and 10.64.114.227 on P6.
192.168.1.22 on P2 can't ping 10.64.114.1 or 10.64.114.227 (but it can ping the router on 192.168.2.41)

Does anyone have any idea how I can get this to work?

Thanks very much.

Ian Shaw wrote: The router can ping 192.168.2.22 on P2 and 10.64.114.227 on P6.
192.168.1.22 on P2 can't ping 10.64.114.1 or 10.64.114.227 (but it can ping the router on 192.168.2.41)

Is this a "Default Gateway" problem on the attached devices? -- are they all set to the Router address for their corresponding network? i.e 192.168.1.41 or 10.64.114.1 etc

Does "Traceroute" reveal anything?