Hi All,

Maybe this question was asked before but I cannot find it

on Draytek 2860 in WAN1 General setup there is an option to setup VLAN tag for VDSL . on Draytek 2962 that option is further split between service and customer. Which section on 2862 (service or customer) should I use for VLAN tagging to achieve same result as VDSL tag on 2860?


Firmware im using is 3.8.5
ISP is Irish Eir which requires VLAN tag 10 on VDSL

TIA

Andrew

Either one will work, but only specify one tag, for instance set the Service Tag to 10, but not both that and the Customer tag.

If both tags are set, the Customer VLAN tag is encapsulated in the Service VLAN tag (double tag)