Hi all, my first post here.

I had been using a 2820n for a few years and was happy with it so I bought a new 2860n earlier this year in anticipation of getting fibre. Openreach have just finished running fibre to all the premises in the village and yesterday I put an order in with Zen for FTTP 80/20. At the moment I am obviously still on ADSL while I wait for an appointment to do the internal installation. What I need to know is the procedure for setting up the 2860n for FTTP, I would appreciate any guidance in this.

Cheers

This should help https://support.zen.co.uk/kb/Knowledgebase/FritzBox-3490-Fibre-Optic-FTTP-Broadband-Setup Don't tick the flood defence otherwise you will have nothing but issues with downloads hope that helps

Thanks for the reply. I see the link takes me to the setup for the Fritz!Box 3490 supplied from Zen which I will keep as a backup, I assume the settings will be similar for the 2860.

Cheers

Settings a simular I've set my 2860 for Zen FTTC same settings as Fitzbox ;)

Are FTTP settings the same as FTTC?

No the settings you have are for FTTP not FTTC, I mean it's a similar process