DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
AP900 borked firmware upgrade
- irksome
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 13
- Thank you received: 0
18 Jan 2018 20:12 #1
by irksome
AP900 borked firmware upgrade was created by irksome
Evening all,
Anyone got any pointers on recovering an AP900 from an interrupted firmware upgrade? I'm getting ACT light on, then it turns off after a few seconds and all the LAN lights flash. Can't seem to get to it via TFTP and restarting it with the reset button held down.
MTIA
Irksome
Anyone got any pointers on recovering an AP900 from an interrupted firmware upgrade? I'm getting ACT light on, then it turns off after a few seconds and all the LAN lights flash. Can't seem to get to it via TFTP and restarting it with the reset button held down.
MTIA
Irksome
Please Log in or Create an account to join the conversation.
- silverstreak_2006
- User
Less
More
22 Jan 2018 14:57 #2
by silverstreak_2006
Replied by silverstreak_2006 on topic Re: AP900 borked firmware upgrade
Is the PSU okay?
Please Log in or Create an account to join the conversation.
- irksome
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 13
- Thank you received: 0
- admin3
- Offline
- Site Admin
Less
More
- Posts: 604
- Thank you received: 0
24 Jan 2018 09:39 #4
by admin3
Forum Administrator
Replied by admin3 on topic Re: AP900 borked firmware upgrade
If you put it manually into TFTP mode by powering it up while holding the factory reset button, does the ACT light blink rapidly? If so, try setting your PC with a fixed IP of 192.168.1.10 and see if you can ping 192.168.1.1. If that works, try sending firmware to it when it's in that state using the firmware upgrade utility.
Forum Administrator
Please Log in or Create an account to join the conversation.
Copyright © 2024 DrayTek