DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2860 v3.8.7

  • mike.smith
  • Topic Author
  • User
  • User
More
22 Mar 2018 20:01 #7 by mike.smith
Replied by mike.smith on topic Re: 2860 v3.8.7
It’s on the .com site, still there, I just checked.

Please Log in or Create an account to join the conversation.

  • silverstreak_2006
  • User
  • User
More
22 Mar 2018 21:29 #8 by silverstreak_2006
Replied by silverstreak_2006 on topic Re: 2860 v3.8.7
The only issues I saw was on an Ln model where the bind had switched itself off. My N-plus has (at least I think) been ok.

The only thing was the reboots, which I will see after a week or so if it restarts again.

Please Log in or Create an account to join the conversation.

  • icornish
  • User
  • User
More
25 Mar 2018 07:34 #9 by icornish
Replied by icornish on topic Re: 2860 v3.8.7

mike.smith wrote: It’s on the .com site, still there, I just checked.


Yep, found it... I was only looking at the UK site :-(

Now running on 3.8.7 VT3, which appears to be rock solid. I used to have occasional problems with IP binding with my work laptop (uses MS DirectAccess) reporting IP conflicts (with itself!), but now no more.
So far up time of 3 days... so quite good... used to only get 48 hours before a reboot, though admittedly, most teenagers are not currently at home, so load has been far lower than normal.

Please Log in or Create an account to join the conversation.

  • mike.smith
  • Topic Author
  • User
  • User
More
25 Mar 2018 07:51 #10 by mike.smith
Replied by mike.smith on topic Re: 2860 v3.8.7
Running VT 4 here, no problems

Please Log in or Create an account to join the conversation.

  • ccarmock
  • User
  • User
More
27 Mar 2018 13:15 #11 by ccarmock
Replied by ccarmock on topic Re: 2860 v3.8.7
The UK version has been released now

Please Log in or Create an account to join the conversation.

  • icornish
  • User
  • User
More
27 Mar 2018 21:26 #12 by icornish
Replied by icornish on topic Re: 2860 v3.8.7

mike.smith wrote: Running VT 4 here, no problems


Curious... Why VT4? Are you not on a standard BT ADSL type connection?

Please Log in or Create an account to join the conversation.