DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Using WAN1 and WAN2 at the same time

  • buggerall
  • Topic Author
  • User
  • User
More
21 Mar 2018 16:12 #1 by buggerall
Using WAN1 and WAN2 at the same time was created by buggerall
I have just bought a Vigor2862ac after updating the firmware it finally connected to Plusnet ADSL service, can I connect a 3 mobile HOMEFI router via its ethernet GB cable to WAN2 on the Vigor and run both systems at the same time.

Looking forward to any help.

Please Log in or Create an account to join the conversation.

More
21 Mar 2018 18:21 #2 by piste basher
Replied by piste basher on topic Re: Using WAN1 and WAN2 at the same time
A quick Google indicates that the Huawei B310 (your 3 device) does not support bridge mode so I'm guessing the answer is no. However you could probably use the Draytek's ability to use a wifi connection on WAN2 to connect to the Huawei.

Please Log in or Create an account to join the conversation.

  • buggerall
  • Topic Author
  • User
  • User
More
21 Mar 2018 19:05 #3 by buggerall
Replied by buggerall on topic Re: Using WAN1 and WAN2 at the same time
I have used the 3 B310 via its ethernet to a switch box to run my home network when the Plusnet land line failed. Could you point me to the setup for WAN2 wifi connection.

Many thanks for your reply.

Please Log in or Create an account to join the conversation.

More
22 Mar 2018 16:54 #4 by piste basher
Replied by piste basher on topic Re: Using WAN1 and WAN2 at the same time
It's on page 70 of the current user's guide.

Please Log in or Create an account to join the conversation.