Hi All,

Have been using a 2760 pretty much out of the box for 6 months. The only slight deviation from factory is that DHCP is OFF as this is provided by a file server on the LAN.

Just recently the office was spilt up and sublet. I was asked to make sure the ethernet sockets in the sublet section would be able to provide Internet but not allow access to the original LAN.

I used port based VLAN's to do this and fed an 8 port switch from port 4 on VLAN1.

Everything is working as it should be but for one thing. Just the wireless clients on VLAN0 are failing to get an IP. I haven't touched the wireless side so wondered if there is something I have missed that isn't in the howto?

https://www.draytek.com/en/faq/faq-connectivity/connectivity.lan/how-to-setup-multi-subnet-with-port-based-vlan/