Hi All,


Has anyone had any issues with using Vigor 130 Modems with a 2862n?


Had two customers now where we've put these in with a Vigor130 to operate a second VDSL in load balancing. But in both cases once both lines are enabled one (usually the one on the 130) stops working or just connects and disconnects which then sends the load balancing logic into a spin.


Both lines set to load balance and always on.



Also had some issues with getting a BT FTTC Modem (UK) going which also normally works fine. In both cases tried on 3.8.9 and 3.9.0 builds and still had issues.


For one customer i swapped in a 2862 (non wireless version) and this seemed to work fine.



Any help would be great

THanks