Hi Guys,

With thanks to a member here i have my ipv6 up and running, however, a need a little more assistance with setting up my ip camera, so i though i would start a new thread.

Basically, i have an IP camera that is accessible via its own app on ios.

Whilst connected to my home network, it's great, however, i am unable to access via 4G.

After reading the guide here to set up the router ( https://reolink.com/ip-camera-port-forwarding/ ), i still cannot connect.

What i have done so far according to the link is...



and...



When i try to enable port 80, it is telling me there is a conflict in the management pages.

However, the app is also still failing to connect via 4G.

Am i correct in assuming this could be a firewall and port issue?

I did try setting up a couple of rules for the firewall, and using port 85 but that didn't seem to help, but i wouldn't be surprised if i had configured them wrong.









Any hints and tips appreciated!

Thanks.