Hi Guys,

I really need some help trying to setup a VLAN to run between devices to ensure separate secure guest WiFi. The setup is shown in the following diagram https://ibb.co/9vsYfpf . I basically have a DrayTek router one end, with A Draytek 903 access point at the other and in between are 2 Netgear GS110TP switches that are linked. I have configured the Drayteks either end following this guide. https://www.draytek.co.uk/support/guides/kb-wireless-guestnetwork-ap

The problem is im having trouble configuring the switches on VLAN10 to allow users to connect onto the Guest WiFi provided by the Draytek 903, having access to just the internet and no other devices on the network. I'm either getting no internet form the AP and blocking traffic between segments of the network or full access to the internet and LAN. Can someone please advice the config I need?


Many thanks in advance!



Kind regards



Trevor

I suspect the Netgear switches will pass the tags in normal unmanaged mode. I would start with plugging the 903 into the router and see if that works.
On the router in the VLAN section make sure you have allocated a port or more to pass the tags. p1 - p2 - p3 etc and plug the 903 into one of those ports.