Dear all,

I'm glad to join Draytek community .
I'm an IT engineer and unfortunately, i'm not a network specialist. I've just some knowledge about network and i know the main rules.
I've bought an hotel (new life) and i want to deploy a new network based on Draytek hardware.

Now I try to configure my system step by step.
Step 1 : basic configuration - OK
-> 4 SSID on the same lan

• Router : 3220 - 192.168.1.1 connect on port 1 of the switch (for multiwan and load balancing (i've 3 internet access))

• Switch : G2280 - 192.168.1.224

• Access point : AP903 - 192.168.1.20 (on mesh mode) connect on port 17 of the switch

Step 2 : Create 4 VLAN and one different VLAN per SSID -> KO
I use this webinar https://www.youtube.com/watch?v=QlPVAhNJD_I but it doesn't work.
The difference between my configuration and the webinar is that in the webinar, the switch is integrated in the router.
Here is what i've done :
Router : 3220
Creation of 4 tagged Vlan (VID 1 = 192.168.1.x, VID 2 = 192.168.2.x, 3 and 4)


AP : 903
Lan general configuration :


SSID configuration :


When i try to connect to all wifi network, it can't get ip adress

Maybe there is something to do on the swith ?

Thanks in advance for your help

For some reason I can't see the images you've attached so I am a bit blind.

But I think you are on the right line as your switch will need to be configured to accept accept VLANs (Personally I don't use draytek switches) particually the port that attaches your AP to the switch. I am not sure of the DRAYTEK settings but it will be something like getting the port to accept tagged traffic and I suspect it is currently only accepting untagged traffic hence the switch is not passing the data back to the router for IP addresses.

Do your LAN's have DHCP enabled ?

Thanks a lot for your help.
There were a problem in the switch configuration.
I have made some screenshot of paramater which works for Router / Switch / AP.
Maybe it can help someone .

Screenshots are avalaible here.

https://www.mediafire.com/file/iwdpnm19ri832ak/Screenshot_Config.pdf/file