DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2862 Using Wan2 as LAN5

  • grazzer
  • Topic Author
  • User
  • User
More
07 May 2021 15:55 #1 by grazzer
2862 Using Wan2 as LAN5 was created by grazzer
I have previously enabled WAN port 2 as LAN port 5 and it has been working well. Now I find that it is no longer configured that way - I suspect since upgrade to 3.9.6_BT. I can't find any way to re-enable as LAN 5. Anyone else seen this/fixed it?

Please Log in or Create an account to join the conversation.

More
07 May 2021 16:37 #2 by admin3
Replied by admin3 on topic Re: 2862 Using Wan2 as LAN5
Isn't that just enabled by disabling WAN2 from [WAN] > [General Setup]? I think as soon as that is set to "No", it becomes LAN P5.

Forum Administrator

Please Log in or Create an account to join the conversation.

  • grazzer
  • Topic Author
  • User
  • User
More
08 May 2021 09:54 #3 by grazzer
Replied by grazzer on topic Re: 2862 Using Wan2 as LAN5
Problem solved - My fault! I had failed to assign LAN Port 5 to one of the VLANs. I had forgotten/didn't realise that if VLANs are enabled ports must be specifically assigned to one or more VLANs.

Please Log in or Create an account to join the conversation.