DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2927 getting killed by Sky Q on demand
- juleswilko
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 34
- Thank you received: 0
27 Feb 2022 20:53 #100721
by juleswilko
2927 getting killed by Sky Q on demand was created by juleswilko
Heya folks,
Random one - Client has upgraded to FTTP, and their 2862 got replaced with the 2927.
Now, when they go to play something downloaded on the Sky Q secondary box - It kills the internet internally.
Also - Had a Draytek 130 running the FTTC fail over. When the internet locked out, WAN2 would show as being offline and a line fault (where there isn't as soon as the router was rebooted, WAN2 would come back online).
The router is still online, but, virtually zero traffic LAN to WAN - like - bytes only.
I can get on the GUI from the web, and reboot the router - All comes back to normal.
If you download and play from the main box - No problems.
Any ideas anyone??
Random one - Client has upgraded to FTTP, and their 2862 got replaced with the 2927.
Now, when they go to play something downloaded on the Sky Q secondary box - It kills the internet internally.
Also - Had a Draytek 130 running the FTTC fail over. When the internet locked out, WAN2 would show as being offline and a line fault (where there isn't as soon as the router was rebooted, WAN2 would come back online).
The router is still online, but, virtually zero traffic LAN to WAN - like - bytes only.
I can get on the GUI from the web, and reboot the router - All comes back to normal.
If you download and play from the main box - No problems.
Any ideas anyone??
Please Log in or Create an account to join the conversation.
- admin3
- Offline
- Site Admin
Less
More
- Posts: 604
- Thank you received: 0
28 Feb 2022 10:39 #100723
by admin3
Forum Administrator
Replied by admin3 on topic Re: 2927 getting killed by Sky Q on demand
Make sure that [Applications] > [IGMP] > IGMP Relay is turned on for the Sky WAN interface.
Try turning on / off IGMP snooping, what you're describing sounds like an IGMP flood, or an interface locked out to stop that with IGMP snooping.
Also turn off UDP Flood Defense under [Firewall] > [Defense Setup] > DoS Defense, if you have that enabled, it could also cause what you're describing.
Try turning on / off IGMP snooping, what you're describing sounds like an IGMP flood, or an interface locked out to stop that with IGMP snooping.
Also turn off UDP Flood Defense under [Firewall] > [Defense Setup] > DoS Defense, if you have that enabled, it could also cause what you're describing.
Forum Administrator
Please Log in or Create an account to join the conversation.
- juleswilko
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 34
- Thank you received: 0
28 Feb 2022 12:55 #100724
by juleswilko
Replied by juleswilko on topic Re: 2927 getting killed by Sky Q on demand
Heya there,
There's nothing "IMGP Relay" only IGMP proxy?
I've turned on the IGMP snooping. (was off / the default before).
UDP Flood defence is off already.
Oddly - This never happened with the 2862 - only since I put in the 2927.
There's nothing "IMGP Relay" only IGMP proxy?
I've turned on the IGMP snooping. (was off / the default before).
UDP Flood defence is off already.
Oddly - This never happened with the 2862 - only since I put in the 2927.
Please Log in or Create an account to join the conversation.
- hornbyp
- Offline
- Big Contributor
Less
More
- Posts: 1323
- Thank you received: 0
03 Mar 2022 02:16 #100732
by hornbyp
Define "kills the internet internally":wink:
Is this a WiFi problem?
By default, the Sky Q box hooks-up via WiFi and also acts as WiFi access point for the mini-boxes. It is non-too fussy as to what it clashes with - it occupies an 80MHz wide channel (36) by default. (Even if not in use, this AP is present, and requires a delve into a hidden menu to disable it). AIUI, the mini-boxes can run in wired-mode, but I'm not sure if they'll connect using any other WiFi.
Can a wired client on the 2927, continue to access the Internet? (what happens to Ping / Tracert /NSlookup / HTTP etc)
Replied by hornbyp on topic Re: 2927 getting killed by Sky Q on demand
juleswilko wrote:
Now, when they go to play something downloaded on the Sky Q secondary box - It kills the internet internally.
Define "kills the internet internally"
Is this a WiFi problem?
By default, the Sky Q box hooks-up via WiFi and also acts as WiFi access point for the mini-boxes. It is non-too fussy as to what it clashes with - it occupies an 80MHz wide channel (36) by default. (Even if not in use, this AP is present, and requires a delve into a hidden menu to disable it). AIUI, the mini-boxes can run in wired-mode, but I'm not sure if they'll connect using any other WiFi.
Can a wired client on the 2927, continue to access the Internet? (what happens to Ping / Tracert /NSlookup / HTTP etc)
Please Log in or Create an account to join the conversation.
- admin3
- Offline
- Site Admin
Less
More
- Posts: 604
- Thank you received: 0
03 Mar 2022 09:09 #100735
by admin3
Forum Administrator
Replied by admin3 on topic Re: 2927 getting killed by Sky Q on demand
Contact support and see if you can get the 4.4.0 release candidate firmware, that should help
Forum Administrator
Please Log in or Create an account to join the conversation.
- juleswilko
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 34
- Thank you received: 0
21 Mar 2022 09:53 #100853
by juleswilko
Replied by juleswilko on topic Re: 2927 getting killed by Sky Q on demand
Heya Hornbyp,
"Is this a WiFi problem?"
Nope - Everything drops. Wired and wireless.
Except I can still get to the router externally via 4G etc from my phone - Which I then login to the GUI and reboot the router.
Then everything works again.
Complete and utter pain in the backside.
The Sky boxes are on a wired connection as they are too far apart (and the walls are stone).
And it's pretty much only the "Silver" boxes that are the cause of the crash.
"Is this a WiFi problem?"
Nope - Everything drops. Wired and wireless.
Except I can still get to the router externally via 4G etc from my phone - Which I then login to the GUI and reboot the router.
Then everything works again.
Complete and utter pain in the backside.
The Sky boxes are on a wired connection as they are too far apart (and the walls are stone).
And it's pretty much only the "Silver" boxes that are the cause of the crash.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek