No, I can access MyVigor if I type it into my browser, just not using the Product Registration link. Sorry I should have stated that in my original post.
The Service Status > Device Status page says:
Connection Failed!
Please check your Internet connection and retry.
The Service Status > Setup & Log page says:
Authentication Log :
Service Status, Activation authenticate fail, contact with support@draytek.com, 2022-09-30 12:37:36
From the command line:
> service -s
Show service status.
Now state is [SS_STATE_OFFLINE_NONLOGIN]
[OFFLINE] Please check your internet and retry!
And yet, the WAN is established:
> ip ping auth.draytek.com
Please wait for around 10 seconds!
>
Pinging 35.189.201.134 with 64 bytes of Data through WAN1:
Receive reply from 35.189.201.134, time=32.6ms
Receive reply from 35.189.201.134, time=30.0ms
Receive reply from 35.189.201.134, time=30.0ms
Receive reply from 35.189.201.134, time=30.0ms
Receive reply from 35.189.201.134, time=30.0ms
Packets: Sent = 5, Received = 5, Lost = 0 (0% loss)
rtt min/avg/max/mdev = 30.0/30.5/32.6/1.5 ms
> ip ping myvigor.draytek.com
Please wait for around 10 seconds!
>
Pinging 35.189.201.134 with 64 bytes of Data through WAN1:
Receive reply from 35.189.201.134, time=24.7ms
Receive reply from 35.189.201.134, time=30.0ms
Receive reply from 35.189.201.134, time=30.0ms
Receive reply from 35.189.201.134, time=30.0ms
Receive reply from 35.189.201.134, time=30.0ms
Packets: Sent = 5, Received = 5, Lost = 0 (0% loss)
rtt min/avg/max/mdev = 24.7/28.9/30.0/2.6 ms
>
Interestingly, there's no serial number listed:
> sys ver dbg
Router Model: Vigor2927 Version: 4.4.2_RC6 English
Profile version: 4.0.0 Status: 1 (0x9de81d91)
Router IP: 10.1.1.5 Netmask: 255.255.255.0
Firmware Build Date/Time: Sep 5 2022 13:54:03
Router Name: L1GW
Revision: 3905_1375b6522b drayos2015
Router serial no: None
!!!Exception debug info is empty!!!
get from address : 60017000
Exception debug info is reset!!
>
