DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
AP902 Universal Repeater
- philguk
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 40
- Thank you received: 0
11 Jun 2023 21:59 #102564
by philguk
AP902 Universal Repeater was created by philguk
About to move to a new house and it looks like I'll need to use wireless to bridge a hard-wire gap in the way the current inhome cabling has been done
I THINK the answer is "yes" (at least I hope so) - Can I use my AP902 in UNIVERSAL REPEATER mode to make a wifi connection back to my router AND create an extended wireless network AND connect some wired ethernet devices to it
In other words, will it act as a wireless RECEIVER and ACCESS POINT and SWITCH all at the same time??
Many thanks
Phil G
I THINK the answer is "yes" (at least I hope so) - Can I use my AP902 in UNIVERSAL REPEATER mode to make a wifi connection back to my router AND create an extended wireless network AND connect some wired ethernet devices to it
In other words, will it act as a wireless RECEIVER and ACCESS POINT and SWITCH all at the same time??
Many thanks
Phil G
Please Log in or Create an account to join the conversation.
- piste basher
- Offline
- Big Contributor
Less
More
- Posts: 1190
- Thank you received: 7
12 Jun 2023 08:24 #102566
by piste basher
Replied by piste basher on topic Re: AP902 Universal Repeater
Before I changed over to mesh mode I used to bridge two AP903's using the WDS facility, which worked fine. The remote AP acted as an AP and switch. In theory I understood that this could also be done using a Draytek router instead of one of the AP's, but I could never get it to work. I vaguely recall that it was something to do with not being able to use WPA2 encryption in that mode, although I could be wrong. But if you already have the devices why not give it a try and see if you can get it to work?
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek