DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Vigor 2927ax IKEv2 Phase 1 Rekey Surfshark
- geea
- Topic Author
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
05 Nov 2023 15:01 #102963
by geea
Vigor 2927ax IKEv2 Phase 1 Rekey Surfshark was created by geea
Hi,
I've been struggling with TCP session disconnects when using a LAN to LAN VPN connection to Surfshark IKEv2 EAP.
When the Phase 1 rekey happens, it terminates all user opened TCP sessions (for example SSH tunnels will disconnect) which the user will then need to reconnect. Once the rekey has complete the VPN tunnel remains solid until the next rekey, which I've now set at 24 hours to lessen disruption.
Is this normal behaviour for IKEv2 EAP or, is something amiss at my end on in the Vigor config or perhaps Surshark's? I tested this with NordVPN and the behaviour is the same.
Ideally I would like to be using the Wireguard LAN to LAN, but that appears limited to ~70Mbps at the moment.
Many thanks
I've been struggling with TCP session disconnects when using a LAN to LAN VPN connection to Surfshark IKEv2 EAP.
When the Phase 1 rekey happens, it terminates all user opened TCP sessions (for example SSH tunnels will disconnect) which the user will then need to reconnect. Once the rekey has complete the VPN tunnel remains solid until the next rekey, which I've now set at 24 hours to lessen disruption.
Is this normal behaviour for IKEv2 EAP or, is something amiss at my end on in the Vigor config or perhaps Surshark's? I tested this with NordVPN and the behaviour is the same.
Ideally I would like to be using the Wireguard LAN to LAN, but that appears limited to ~70Mbps at the moment.
Many thanks
Please Log in or Create an account to join the conversation.
- nieldm
- Offline
- Junior Member
Less
More
- Posts: 73
- Thank you received: 0
19 Nov 2023 10:07 #102988
by nieldm
Replied by nieldm on topic Re: Vigor 2927ax IKEv2 Phase 1 Rekey Surfshark
I have a 2927ax and Surfshark works fine using IKEv2 EAP. How are you configuring the Phase settings? It's not possible to include screenshots on this forum but if you like you can post the issue on Reddit (/r/Draytek) and I'll take a look.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek