DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2862 config for BT FFTP

addanc
Topic Author
Offline
New Member

07 Dec 2023 18:32 #1 by addanc

2862 config for BT FFTP was created by addanc

DrayTek model: Vigor 2862ac
Firmware: 3.9.6_BT
Recently moved from BT VDSL to full fibre and having problems getting the router to connect to the internet. The router now connects to the ONT through ethernet on WAN2; can anybody confirm that the above firmware is good for this new configuration? Can anybody supply a link to precise router set-up instructions for the new configuration?

Please Log in or Create an account to join the conversation.

navzptc
Offline
New Member

08 Dec 2023 00:27 #2 by navzptc

Replied by navzptc on topic Re: 2862 config for BT FFTP

Have a look here

https://www.draytek.co.uk/support/guides/kb-fttp-wan-setup

Make sure to read the notes regarding the 2862 towards the bottom.

Please Log in or Create an account to join the conversation.

addanc
Topic Author
Offline
New Member

08 Dec 2023 18:17 #3 by addanc

Replied by addanc on topic Re: 2862 config for BT FFTP

Solution for BT FFTP in UK:
Enable PPPoE on WAN2
On associated details page:
Username: bthomehub@btbroadband.com
Password: BT

Please Log in or Create an account to join the conversation.

Moderators: Sami