DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
PRTG and SNMP
- raddo
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
13 Mar 2024 14:48 #1
by raddo
PRTG and SNMP was created by raddo
Hi All
Im trying to do SNMP monitoring on multiple Draytek routers for different customer using PRTG. Basic setup is ok and I am getting details about WAN 2 usage and memory usage etc for various systems.
What im not getting is details about the WLAN and LAN speeds even though PRTG is reporting they are connected.
Im new to SNMP and not even sure if its the correct way to go so would appreciate any advice!
Thanks!
Im trying to do SNMP monitoring on multiple Draytek routers for different customer using PRTG. Basic setup is ok and I am getting details about WAN 2 usage and memory usage etc for various systems.
What im not getting is details about the WLAN and LAN speeds even though PRTG is reporting they are connected.
Im new to SNMP and not even sure if its the correct way to go so would appreciate any advice!
Thanks!
Please Log in or Create an account to join the conversation.
- e.ringrose
- Offline
- Member
-
Less
More
- Posts: 106
- Thank you received: 0
01 May 2024 22:51 #2
by e.ringrose
Replied by e.ringrose on topic Re: PRTG and SNMP
You can certainly get LAN speed via SNMP into PRTG, traffic In/Traffic Out & total and also WAN traffic.
If I recall you need to download the MIB file from DrayTek and convert this and import in PRTG.
I don't think the WLAN interface(s) are available though.
If I recall you need to download the MIB file from DrayTek and convert this and import in PRTG.
I don't think the WLAN interface(s) are available though.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek