DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2862/P2280 VLANs
- oldfield-pete
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
05 Aug 2019 14:19 #1
by oldfield-pete
2862/P2280 VLANs was created by oldfield-pete
Have a 2862 on 3.9.0, and P2280 on 2.4.0.
2862 has 2 VLANs:
VLAN0 Ports 1-4 Untagged LAN1 (192.168.8.x)
VLAN1 Ports 1-4 Tag 20 LAN2 (192.168.4.x)
I have an AP902 configured with 2 SSIDs:
SSID1 untagged LAN1
SSID2 tag 20 LAN2
this is wired to 2862 port 1 and works fine for DHCP assignment to wireless clients on SSID 1 & 2, assigning correct LAN IP from LAN1 or LAN2.
P2280 is connected to 2862 port 4. What I want to happen is for the P2280 to get a LAN IP from LAN2 DHCP (192.168.4.x), and for anything connected to any of the ports to also be on VLAN1 getting 192.168.4.x IP. I know this is possible via VLAN config, using trunk and access ports and PVID of 20.
For the life of me I cannot get the P2280 to do this in VLAN config! I tried to use central switch mgmt in the 2862 as that sounds a lot easier, but even though the 2862 sees the P2280, when I try and click Add New it says update firmware on P2280 (it is up to date).
Can anyone give me any pointers here?
2862 has 2 VLANs:
VLAN0 Ports 1-4 Untagged LAN1 (192.168.8.x)
VLAN1 Ports 1-4 Tag 20 LAN2 (192.168.4.x)
I have an AP902 configured with 2 SSIDs:
SSID1 untagged LAN1
SSID2 tag 20 LAN2
this is wired to 2862 port 1 and works fine for DHCP assignment to wireless clients on SSID 1 & 2, assigning correct LAN IP from LAN1 or LAN2.
P2280 is connected to 2862 port 4. What I want to happen is for the P2280 to get a LAN IP from LAN2 DHCP (192.168.4.x), and for anything connected to any of the ports to also be on VLAN1 getting 192.168.4.x IP. I know this is possible via VLAN config, using trunk and access ports and PVID of 20.
For the life of me I cannot get the P2280 to do this in VLAN config! I tried to use central switch mgmt in the 2862 as that sounds a lot easier, but even though the 2862 sees the P2280, when I try and click Add New it says update firmware on P2280 (it is up to date).
Can anyone give me any pointers here?
Please Log in or Create an account to join the conversation.
- 丨>®@yt3丨<
- Offline
- Site Admin
-
Less
More
- Posts: 7
- Thank you received: 0
27 Aug 2019 16:05 #2
by 丨>®@yt3丨<
Replied by 丨>®@yt3丨< on topic Re: 2862/P2280 VLANs
hi oldfield-pete,
I have tried a similar setup on v2862 running latest 3.9.1 firmware. My P2280 is updated with 2.4.3 FW and they both work fine.
Try this linkhttp://www.draytek.co.uk/support/downloads
I have tried a similar setup on v2862 running latest 3.9.1 firmware. My P2280 is updated with 2.4.3 FW and they both work fine.
Try this link
Please Log in or Create an account to join the conversation.
- calummcm
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
11 Oct 2019 21:55 #3
by calummcm
Replied by calummcm on topic Re: 2862/P2280 VLANs
Hello,
I am having the exact same problem with the central management,
I am also struggling to get VLANS set up with the switch too, I thought it'd be easy
I just want to have 4 ports on VLAN 2 and the rest on VLAN 1 but I can't seem to figure it out....
I am having the exact same problem with the central management,
I am also struggling to get VLANS set up with the switch too, I thought it'd be easy
I just want to have 4 ports on VLAN 2 and the rest on VLAN 1 but I can't seem to figure it out....
Please Log in or Create an account to join the conversation.
- leighwhitling
- Offline
- Junior Member
-
Less
More
- Posts: 27
- Thank you received: 0
13 Dec 2019 20:08 #4
by leighwhitling
Replied by leighwhitling on topic Re: 2862/P2280 VLANs
i found that i got this issue when i was not on the same lan / ip address.
Did you get it going in the end ?
Did you get it going in the end ?
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek