DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Vigor 130
- fatdave42
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 3
- Thank you received: 0
08 Oct 2019 07:36 #1
by fatdave42
Vigor 130 was created by fatdave42
Hi. I would like to add a Vigor 130 to my ACS account. The user manual has the information for how to do it, but the menu options are not on the modem.
The modem is on the latest firmware.
The modem is on the latest firmware.
Please Log in or Create an account to join the conversation.
- adrianh54
- Offline
- Member
-
Less
More
- Posts: 428
- Thank you received: 0
08 Oct 2019 09:05 #2
by adrianh54
Replied by adrianh54 on topic Re: Vigor 130
The UK Vigor 130 is a modem only, the Quick Start Guide is located here >> https://www.draytek.co.uk/support/downloads/vigor-130
It sounds like you have downloaded a user manual for the router model used in other countries.
Thank you for purchasing this DrayTek Vigor 130 DSL modem. It provides
compatibility with ADSL and VDSL lines, outputting to a single Gigabit
(1000BaseT) Ethernet port. Throughout this guide, when we refer to DSL
or xDSL, that means either VDSL (FTTC) or ADSL/ADSL2+.
The Vigor 130’s primary function is as a transparent bridge modem for
xDSL services – not as a router/firewall in itself. It connects a secondary
router or other device to your DSL line, where that device does not directly
support DSL itself.
As a bridge, the Vigor 130 only provides the physical conversion from
xDSL (ADSL or VDSL) to Ethernet and all firewalling, routing or other
advanced routing functions are managed by your secondary device (a
separate router, firewall etc.). The secondary device may also be a single
PC, a PC-based software router or an Apple Airport™ type device.
The Vigor 130 comes preconfigured for most UK ISPs. Therefore, in most
cases you do not need to perform any setup of the Vigor 130 at all. You only
need to physically connect it (plug it in) and then configure your connected
router/firewall. Your ISP username and password go into your router, not the
Vigor 130, which just acts as the DSL-to-Ethernet bridge.
It sounds like you have downloaded a user manual for the router model used in other countries.
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
-
Less
More
- Posts: 1723
- Thank you received: 0
08 Oct 2019 14:06 #3
by admin
Forum Administrator
Replied by admin on topic Re: Vigor 130
Yes; you cannot add a 'bridge version' of the Vigor130 to VigorACS as it's a transparent bridge - all data goes straight thorough it, no interception, including TR069.
Forum Administrator
Please Log in or Create an account to join the conversation.
- fatdave42
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 3
- Thank you received: 0
08 Oct 2019 14:20 #4
by fatdave42
Replied by fatdave42 on topic Re: Vigor 130
Many thanks.
Do you know if I can set a sonic wall to look at ACS?
Do you know if I can set a sonic wall to look at ACS?
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
-
Less
More
- Posts: 1723
- Thank you received: 0
08 Oct 2019 15:33 #5
by admin
Forum Administrator
Replied by admin on topic Re: Vigor 130
No; Draytek's VigorACS supports only their own products.
Forum Administrator
Please Log in or Create an account to join the conversation.
- fatdave42
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 3
- Thank you received: 0
08 Oct 2019 16:39 #6
by fatdave42
Replied by fatdave42 on topic Re: Vigor 130
Ok.
Shame I cannot get the 130 on ACS, but that is not the end of the world.
Shame I cannot get the 130 on ACS, but that is not the end of the world.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek