DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2910 to 3300v: sent MR1, expecting MI2.

  • bernie123
  • Topic Author
  • Offline
  • New Member
  • New Member
More
18 Feb 2008 14:18 #47655 by bernie123
2910 to 3300v: sent MR1, expecting MI2. was created by bernie123
Hi

We have a 2910 and 3300v VPN, the 2910 was switched off over the weekend and this morning it cannot connect to the 3300v.

It has been regularly rebooted many times before, but suddenly this time no VPN connection to one site! Both the 3300v and 2910 have no problems with the other VPN connections that they receive / initiate.

Anyway we have deleted and re-created the Lan to Lan connections on both routers but are getting the below logs, it appears more specifically "sent MR1, expecting MI2." causing the problem.

Any advice would be much appreciated.,

Thanks
B

syslog: FEB 18 14:13:3 Vigor3300 {4_Remote}:sent MR1, expecting MI2.
syslog: FEB 18 14:13:3 Vigor3300 {4_Remote}:receive MainI1
syslog: FEB 18 14:13:3 Vigor3300 ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
syslog: FEB 18 14:13:3 Vigor3300 ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02]
syslog: FEB 18 14:13:3 Vigor3300 ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n]
syslog: FEB 18 14:13:3 Vigor3300 ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03]
syslog: FEB 18 14:13:3 Vigor3300 received Vendor ID payload [RFC 3947]
syslog: FEB 18 14:13:3 Vigor3300 received Vendor ID payload [Dead Peer Detection]
syslog: FEB 18 14:13:3 Vigor3300 receive ISAKMP packet: src:{xxx.xxx.xxx.xxx}, dst:{xxx.xxx.xxx.xxx}, MsgID:{0x00000000}, Ci:{86 88 81 02 09 0C 8C 86}, Cr:{00 00 00 00 00 00 00 00}

Please Log in or Create an account to join the conversation.

More
03 Apr 2008 21:27 #48701 by mcsmmcsm
Replied by mcsmmcsm on topic 2910 to 3300v: sent MR1, expecting MI2.
I also have this problem , did you have any joy?

Please Log in or Create an account to join the conversation.

  • bernie123
  • Topic Author
  • Offline
  • New Member
  • New Member
More
03 Apr 2008 21:32 #48702 by bernie123
Replied by bernie123 on topic 2910 to 3300v: sent MR1, expecting MI2.
Hi

Probably not a useful answer but; we ended up switching the 2910 off for 2 hours and all was fixed when we switched it on again!

B

Please Log in or Create an account to join the conversation.

More
03 Jan 2010 21:36 #59609 by jayfive
Replied by jayfive on topic 2910 to 3300v: sent MR1, expecting MI2.
did anyone find a solution for this ?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami