DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Internet access via Shrew VPN client (Vigor2820)
- draytek36
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 4
- Thank you received: 0
09 Dec 2008 15:32 #1
by draytek36
Internet access via Shrew VPN client (Vigor2820) was created by draytek36
I have set up an IPSec-VPN connection from my notebook with the shrew
client to a Vigor 2820. It works fine, I can access the whole network
connected to the Vigor 2820.
However this is what I have trouble with:
I would like to make sure, that the remote site does not access the Internet
via it's local IP Address. All web access needs to go through the tunnel.
Any idea how to achieve that?
Thanks for your help
PS At the moment if the IPSec-VPN tunnel is established it is not possible to access the internet at all.
client to a Vigor 2820. It works fine, I can access the whole network
connected to the Vigor 2820.
However this is what I have trouble with:
I would like to make sure, that the remote site does not access the Internet
via it's local IP Address. All web access needs to go through the tunnel.
Any idea how to achieve that?
Thanks for your help
PS At the moment if the IPSec-VPN tunnel is established it is not possible to access the internet at all.
Please Log in or Create an account to join the conversation.
- edwin
- Offline
- New Member
-
Less
More
- Posts: 3
- Thank you received: 0
26 Jun 2009 21:59 #2
by edwin
Replied by edwin on topic Internet access via Shrew VPN client (Vigor2820)
How did you setup shrew?
btw for your q. I think you have to work with the gateway checkbox on the network connection advanced tab somewhere deep down
btw for your q. I think you have to work with the gateway checkbox on the network connection advanced tab somewhere deep down
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek