DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

IPSEC between 2820 and ISA 2006

  • neilbarker
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 Jan 2010 08:59 #1 by neilbarker
IPSEC between 2820 and ISA 2006 was created by neilbarker
Hi,

I have setup an ipsec tunnel between my 2820 on the remote site and my ISA 2006 on the local site.

The tunnel is working fine however when I look at the connection status on the 2820 there are no RX packets beng recieved and only a few TX packets being sent.

I can not ping the remote site from my LAN. the LAN is on 10.1.0.0 and the 2820 lives on 192.168.1.0.

I used a site to site VPN wizard on the ISA and this has created the rules needed on the LAN however I tracert from my local PC to 192.168.1.123 and it stops at my local ISA server and does not go anywhere else. The same is true when I try and ping from remote to LAN, the tracert stops at the 2820 and goes nowhere.

I have setup a route on the ISA server and looked at the IP tables for the external connection and 192.168.1.0 is present and routes to the correct gateway.

What have I missed??? Been on this for 3 days now...

Thanks

Neil

Please Log in or Create an account to join the conversation.

More
23 Aug 2010 17:25 #2 by chrisdrees
Replied by chrisdrees on topic IPSEC between 2820 and ISA 2006
did you get anywhere with this? im trying to setup a tunnel between a juniper and 28200and getting similar problem.

Please Log in or Create an account to join the conversation.