DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

No PING across working PPTP lan-lan

  • sean.hennessy
  • Topic Author
  • Offline
  • New Member
  • New Member
More
05 May 2010 12:51 #61913 by sean.hennessy
No PING across working PPTP lan-lan was created by sean.hennessy
Hi Room

Ive setup a PPTP using a 5510 as the main VPN server and have a 2820 connecting in from a remote office all under static external IP addresses.
The remote office can use all our servers etc, however i cannot ping a device at the remote office from inside the main office across the link.

I have setup a test dial in vpn the other way into the remote and when i connect to that i can ping, however i need to be able to ping without dialing in..

Any advice very welcome.

Cheers

Please Log in or Create an account to join the conversation.

More
05 May 2010 19:48 #61921 by njh
Replied by njh on topic No PING across working PPTP lan-lan
It is not the solution to your problem, but if you're doing a router-router VPN it is generally better (more secure) to use an IPSec VPN and they are normally pretty easy to set up.

Are the two subnets at either end of the tunnel different?

2900Gi/v2.5.6; 2900/v2.5.6

Please Log in or Create an account to join the conversation.

  • sean.hennessy
  • Topic Author
  • Offline
  • New Member
  • New Member
More
06 May 2010 07:04 #61923 by sean.hennessy
Replied by sean.hennessy on topic No PING across working PPTP lan-lan
Hi

Yeah thanks for the comments.
I have just implemented the IPSEC Lan to Lan which tooks its time to connect but works now.

Yes the subnets are different - but the problem i had was that the 2nd IP address on the router was conflicting with the subnets.

Just a hint to make sure that its set to disabled i guess.

Cheers

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami