Hi All

Can anybody advise me if it is possible to use both Wan ports for VPN remote access. All my remote workers use Wan1 but I would like to be able to dial in using Wan2 which has a much faster connection, but keep the others on Wan1.

Thanks for any advice.

Use the WAN2 IP address to connect as a dial-in user rather than WAN1's IP That should get you connected using WAN2

Thanks for your quick answer. I have already tried this but the vpn just will not start a connection.

Which Draytek router are you using and what are you using for your second WAN2 connection?

If you are using a second ADSL on WAN2 then you may need to do some port forwarding to the main router.

That's a good point, if the WAN2 connection is going through another router, you'll need to check whether that router support VPN pass-through and use the 2820's WAN2 IP as the DMZ IP on that router.

Thanks guys, I am using the Draytek 2950 with Vigor 100 on Wan1 and BT's new Fibre Broadband on Wan2 with the connection coming directly from BT's Open Reach modem. I have not used their 2Wire Router.