DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Lan to Lan VPN drops after 50 Seconds
- cisco-kid
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
12 Nov 2010 14:25 #64843
by cisco-kid
http://cisco-kid.co.uk/forum
Lan to Lan VPN drops after 50 Seconds was created by cisco-kid
I have configured an IPsec site to site VPN between a FortiGate and a Draytek 2820. I got the VPN to come up but it keeps dropping connection after 50 seconds and then instantly reconnects. So it is working fine for some data connections like remote access to mail, but others are not working because of it.
Has anyone else experienced this issue? Any way to solve the problem.
Draytek is running latest firmware.
Has anyone else experienced this issue? Any way to solve the problem.
Draytek is running latest firmware.
Please Log in or Create an account to join the conversation.
- cisco-kid
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
12 Nov 2010 15:47 #64845
by cisco-kid
http://cisco-kid.co.uk/forum
Replied by cisco-kid on topic Lan to Lan VPN drops after 50 Seconds
It helps if you set the IP address of the enable ping keepalive to a valid internal address! :oops:
Please Log in or Create an account to join the conversation.
- njh
- Offline
- Member
Less
More
- Posts: 306
- Thank you received: 0
12 Nov 2010 17:58 #64847
by njh
2900Gi/v2.5.6; 2900/v2.5.6
Replied by njh on topic Lan to Lan VPN drops after 50 Seconds
Do you even need the ping keepalive? Can you set the 2820 to always on or its timeout to 0? On the Fortigate is there any similar option or else does it support dead peer detection?
2900Gi/v2.5.6; 2900/v2.5.6
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek