DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820vn ipsec remote dial in user

  • ajrussell
  • Topic Author
  • Offline
  • New Member
  • New Member
More
29 Jul 2011 13:37 #68809 by ajrussell
2820vn ipsec remote dial in user was created by ajrussell
I'm trying to configure IPsec remote dial in user - I can get PPTP to connect fine, but when trying to connect I get disconnected with error 619.

Im sure im setup correctly - logs from connection


2011-07-29 13:35:05 PPP Start (VPN- Profile index = 2, Name = HQ - IPSEC, ifno = 8)
2011-07-29 13:35:05 IPsec SA established with 172.24.1.50
2011-07-29 13:35:05 Responding to Quick Mode from 172.24.1.50
2011-07-29 13:35:05 Reveive cleint L2L remote network setting is 172.24.1.1/32
2011-07-29 13:35:05 sent MR3, ISAKMP SA established with 172.24.1.50
2011-07-29 13:35:05 NAT-Traversal: Using RFC 3947, no NAT detected
2011-07-29 13:35:05 Responding to Main Mode from 172.24.1.50



Any ideas?

Please Log in or Create an account to join the conversation.

  • ajrussell
  • Topic Author
  • Offline
  • New Member
  • New Member
More
29 Jul 2011 13:45 #68812 by ajrussell
Replied by ajrussell on topic Re: 2820vn ipsec remote dial in user
Ok now PPTP has stopped working.

Log:

PPP Start (VPN- Profile index = 2, Name = HQ - IPSEC, ifno = 8)

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami