We have two 2830 setup with a LAN-LAN vpn tunnel all is fine:-

router A = 192.168.53.254 router B = 192.168.43.254, these route between the two subnets 192.168.53.0 and 192.168.43.0.
At the B end we have an Ethernet router with two NICS one on the 43.x subnet and one on 192.168.1.0 range. We are trying to route packets from 192.168.1.0 to the router A end 192.168.53.0.
Can you advise me what additional routing I would need to set up if indeed possible on the two routers to route the packets over the existing VPN tunnel between the two router.
I have tried playing with LAN/static routes and also adding additional networks on the VPN LAN - LAN profile to no avail.

Anybody know how if possible to add extra routes down the lan2lan VPN tunnel :?:
Thanks :mrgreen:

if it's between two Vigor's use the 'more' button the the profile to add the extra subnet.

i have a very similiar situation, however, it isnt between two vigors.

we have an ASA at one end. the tunnel is fine, and passing data, but we have additional subnets at the ASA end.

the More button does not work in this scenario.

Please advise whether this product is capable of this and if so, how!

thanks

Same issue Between 2830 and a Sonicwall. Only the first subnet specified works despite 2 further subnets being added. Tunnel only connects to the first subnet. Help!