Hi all,
I setup VPN site-to-site. My site use Vigor2910
-My site:
+ LAN: 10.210.165.0/24
- Remote site:
+ LAN1: 10.199.59.0/24
+ LAN2: 150.180.77.0/24
In VPN Profile, I configured:
5. TCP/IP network settings
- My WAN IP: 0.0.0.0
- Remote gateway IP: 0.0.0.0
- Remote Network IP: 10.199.59.0
- Remote network subnet: 255.255.255.0
- Local network IP: 10.210.165.0
- Local network mask: 255.255.255.0
- More: 150.180.77.0/24
After config, the VPN tunnel runs. I used my PC, and can ping to 10.199.59.xxx. But I cannot ping 150.180.77.xxx

If I change configure
- Remote Network IP: 150.180.77.0
- More: 10.199.59.0
I can ping 150.180.77.xxx , but can not ping 10.199.59.xxx

Kindly to help me to resolve this issue.
Thanks

Is 150.180.77.xxx a private address range? I don't think it is, so the processing may not be handled the way you would like.

I think you need 10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255

ranges. See: http://en.wikipedia.org/wiki/Private_network#Private_IPv4_address_spaces

Best regards, Neal

Thanks for your help
The network 150.x.x.x is belong to my partner. I can not handle.
But I don't understand that if I configured thist subnet to Remote Network IP Field in VPN profile, i can ping to it over the vpn tunnle

Hey, I know this is an old post but did you get this working in the end? if so, how did you do it?

Thanks!