I have a Draytek 2830 and I'm having trouble routing traffic from a VLAN up the IPSec VPN we have.

The native LAN is 192.168.10.0/23

We have 3 VLANS;
VLAN10 (192.168.100.0/24)
VLAN20 (192.168.200.0/24)
VLAN30 (192.168.30.0/24)

Our IPSec VPN connects to network 10.98.136.0/23

We have routing active between all VLANs.

The problem is, we are unable to send traffic from VLAN20 to the IPSec VPN LAN. We can get to the internet.

It sounds like we need a route from the VLAN to the VPN but I'm unsure how to do this.

Thanks,

Ben

Are all the trusted LANs member of the IPSECs at both ends?

You might have to create a separate profile on a 2830 for each lan but I have not test this yet.

I know with other vendors you can create one IKE (remote gateway address)and then associate the trusted lan to that tunnel.

I don't think this is possible on a 2830