Hi All,

Loooking for a bit of assistance, we had a 2850 with only one WAN doing a VPN tunnel. The WAN connection was rubbish, so a second WAN 2 connection has be added and works fine. I would like to define the traffic as follow ( customer directions ).

WAN1- Internet use only, WAN2 - VPN use only.

Can someone please assist on the best way to achieve this please.

Kind Regards

Richard

Hi Richard,

Have a look at the settings for Load Balance Policy (Under WAN) in the menu.

You should be able to use that to force all the internet traffic via WAN1.

If it's a LAN to LAN vpn, you can set which WAN connection to dial out from in the Profile settings.

Kind Regards

Richard