We are also having the same issue. Does anyone have a fix for this?

I don't get the same result (mine is fine) but may not have the same model/firmware.
Best to ask support and confirm exactly what firmware and model you're using as I don't think this is a problem if set up correctly.

Sorry meant to post this ages ago, hope it helps some of you.

Please follow the procedure below to disable SSL VPN service:
- Make sure that SSL VPN is enabled, allow reboot
- Change HTTPS management port to e.g. 4443, allow reboot
- Change SSL VPN port to 4443
- Disable SSL VPN in remote access control menu, allow reboot
- Return HTTPS management to 443, allow reboot

It seems a bit crazy but it works!

Hi, I have finally fallen foul of this but I am actually using SSL VPN to get to our LAN from outside so need it enabled. How do I sort this out without switching SSL VPN off?

As with the OP, the PCI scan is also complaining of using TLS 1.0 even though I have upgraded firmware to the latest (3.6.8.4_sb_232201) which is meant to be using TLS 1.1.

Thanks

Dan

Check the DrayTek UK site for 3.6.8.5 firmware, which is now available on the downloads page, it adds an option on the [System Maintenance] > [Management] page to enable/disable TLS 1.0/1.1/1.2.

Thanks, just noticed that. They must have released it the day after I downloaded what I thought was the most recent!