DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
VPN LAN to LAN Connection Management issues
- groupbelec
- Topic Author
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
27 Jun 2017 14:55 #89185
by groupbelec
VPN LAN to LAN Connection Management issues was created by groupbelec
Hello Draytek community!
I am having an issue with a site connection, we have a Draytek Vigor 2830 at the main (Site 1) which connects to two other small office sites - one at (Site 2) with a Vigor 2830 and one at (Site 3) with a Vigor 2820. They are connected to the main Draytek Vigor 2830 at (Site 1) via VPN Lan to Lan IPsec however we seem to have noticed issues with the (Site 3) connection sometimes dropping out, on the (Site 1) router in Connection Management Page inside the VPN & Remote Access panel settings it shows multiple connection listings on the VPN Connection Status for the (Site 3) Vigor router (like shown below) -
(Site 2 connection below has only one instance and is working fine, only Site 3 is creating multiple connections instances and may be the problem)
VPN 1
( Site2 ) Type IPsec Tunnel
3DES-SHA1 Auth
Remote IP 82.69.95.25* via WAN2
(Virtual Network) 192.168.101.0/24 (Tx Pkts) 134925 (Tx Rate(Bps)) 59 (Rx Pkts) 110757 (Rx Rate(Bps)) 36 UpTime[/b] 18:47:42
VPN 2
( Site3 ) Type IPsec Tunnel
3DES-SHA1 Auth 82.69.34.13* via WAN2
(Virtual Network) 192.168.103.0/24 (Tx Pkts) 0 (Tx Rate(Bps)) 0 (Rx Pkts) 1 (Rx Rate(Bps)) 0 UpTime[/b] 0:0:0
VPN 3
( Site3 ) Type IPsec Tunnel
3DES-SHA1 Auth 82.69.34.13* via WAN2
(Virtual Network) 192.168.103.0/24 (Tx Pkts) 0 (Tx Rate(Bps)) 0 (Rx Pkts) 0 (Rx Rate(Bps)) 0 UpTime[/b] 0:13:2
VPN 4
( Site3 ) Type IPsec Tunnel
3DES-SHA1 Auth 82.69.34.13* via WAN2
(Virtual Network) 192.168.103.0/24 (Tx Pkts) 0 (Tx Rate(Bps)) 0 (Rx Pkts) 0 (Rx Rate(Bps)) 0 UpTime[/b] 0:11:46
VPN 5
( Site3 ) Type IPsec Tunnel
3DES-SHA1 Auth 82.69.34.13*
via WAN2 (Virtual Network) 192.168.103.0/24 (Tx Pkts) 8 (Tx Rate(Bps)) 3 (Rx Pkts) 0 (Rx Rate(Bps)) 0 UpTime[/b] 0:10:30
VPN 6
( Site3 ) Type IPsec Tunnel
3DES-SHA1 Auth 82.69.34.13* via WAN2
(Virtual Network) 192.168.103.0/24 (Tx Pkts) 0 (Tx Rate(Bps)) 0 (Rx Pkts) 3 (Rx Rate(Bps)) 3 UpTime[/b] 0:8:48
VPN 7
( Site3 ) Type IPsec Tunnel
3DES-SHA1 Auth 82.69.34.13* via WAN2
(Virtual Network) 192.168.103.0/24 (Tx Pkts) 190 (Tx Rate(Bps)) 3 (Rx Pkts) 7 (Rx Rate(Bps)) 3 UpTime[/b] 0:7:36
Thanks!
I am having an issue with a site connection, we have a Draytek Vigor 2830 at the main (Site 1) which connects to two other small office sites - one at (Site 2) with a Vigor 2830 and one at (Site 3) with a Vigor 2820. They are connected to the main Draytek Vigor 2830 at (Site 1) via VPN Lan to Lan IPsec however we seem to have noticed issues with the (Site 3) connection sometimes dropping out, on the (Site 1) router in Connection Management Page inside the VPN & Remote Access panel settings it shows multiple connection listings on the VPN Connection Status for the (Site 3) Vigor router (like shown below) -
(Site 2 connection below has only one instance and is working fine, only Site 3 is creating multiple connections instances and may be the problem)
VPN 1
( Site2 ) Type IPsec Tunnel
3DES-SHA1 Auth
Remote IP 82.69.95.25* via WAN2
(Virtual Network) 192.168.101.0/24 (Tx Pkts) 134925 (Tx Rate(Bps)) 59 (Rx Pkts) 110757 (Rx Rate(Bps)) 36 UpTime[/b] 18:47:42
VPN 2
( Site3 ) Type IPsec Tunnel
3DES-SHA1 Auth 82.69.34.13* via WAN2
(Virtual Network) 192.168.103.0/24 (Tx Pkts) 0 (Tx Rate(Bps)) 0 (Rx Pkts) 1 (Rx Rate(Bps)) 0 UpTime[/b] 0:0:0
VPN 3
( Site3 ) Type IPsec Tunnel
3DES-SHA1 Auth 82.69.34.13* via WAN2
(Virtual Network) 192.168.103.0/24 (Tx Pkts) 0 (Tx Rate(Bps)) 0 (Rx Pkts) 0 (Rx Rate(Bps)) 0 UpTime[/b] 0:13:2
VPN 4
( Site3 ) Type IPsec Tunnel
3DES-SHA1 Auth 82.69.34.13* via WAN2
(Virtual Network) 192.168.103.0/24 (Tx Pkts) 0 (Tx Rate(Bps)) 0 (Rx Pkts) 0 (Rx Rate(Bps)) 0 UpTime[/b] 0:11:46
VPN 5
( Site3 ) Type IPsec Tunnel
3DES-SHA1 Auth 82.69.34.13*
via WAN2 (Virtual Network) 192.168.103.0/24 (Tx Pkts) 8 (Tx Rate(Bps)) 3 (Rx Pkts) 0 (Rx Rate(Bps)) 0 UpTime[/b] 0:10:30
VPN 6
( Site3 ) Type IPsec Tunnel
3DES-SHA1 Auth 82.69.34.13* via WAN2
(Virtual Network) 192.168.103.0/24 (Tx Pkts) 0 (Tx Rate(Bps)) 0 (Rx Pkts) 3 (Rx Rate(Bps)) 3 UpTime[/b] 0:8:48
VPN 7
( Site3 ) Type IPsec Tunnel
3DES-SHA1 Auth 82.69.34.13* via WAN2
(Virtual Network) 192.168.103.0/24 (Tx Pkts) 190 (Tx Rate(Bps)) 3 (Rx Pkts) 7 (Rx Rate(Bps)) 3 UpTime[/b] 0:7:36
Thanks!
Please Log in or Create an account to join the conversation.
- sircles
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
24 Aug 2017 13:41 #89475
by sircles
http://sircl.es Website and app development
http://www.TopOnGoogle.com SEO and Internet Marketing
http://store.sircles.net Computing On-line Store
Replied by sircles on topic Re: VPN LAN to LAN Connection Management issues
Can you post the config from site 1 & 3?
Have you left it at both directions on both routers?
Perhaps just rig a one way - and choose 'always on' at one end and receive only at the other with ping to keep alive on?
Have you left it at both directions on both routers?
Perhaps just rig a one way - and choose 'always on' at one end and receive only at the other with ping to keep alive on?
http://sircl.es Website and app development
http://www.TopOnGoogle.com SEO and Internet Marketing
http://store.sircles.net Computing On-line Store
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek