DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Configure LAN to LAN using 4G IP Passthought
- muslim
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
25 Aug 2019 11:01 #1
by muslim
Configure LAN to LAN using 4G IP Passthought was created by muslim
Hi,
Basically I want to configure a LAN to LAN with 4G Router (Netgear MR1100) using IP Passthrough on WAN2.
Both side have a Vigor 2860s router.
My idea to configure in my main router
![](https://i.ibb.co/6PGq1L0/Dashboard.jpg)
![](https://i.ibb.co/Mck1Y5g/Dynamic-DNS-Setup.jpg)
![](https://i.ibb.co/PrDMNk4/Internet-Access.jpg)
![](https://i.ibb.co/HPZx1W9/lan-to-lan.jpg)
![](https://i.ibb.co/Vp0GMb5/Mobile-Router-Setup.jpg)
![](https://i.ibb.co/FmrpLTc/Network.jpg)
Please advice
Thank you
Basically I want to configure a LAN to LAN with 4G Router (Netgear MR1100) using IP Passthrough on WAN2.
Both side have a Vigor 2860s router.
My idea to configure in my main router
![](https://i.ibb.co/6PGq1L0/Dashboard.jpg)
![](https://i.ibb.co/Mck1Y5g/Dynamic-DNS-Setup.jpg)
![](https://i.ibb.co/PrDMNk4/Internet-Access.jpg)
![](https://i.ibb.co/HPZx1W9/lan-to-lan.jpg)
![](https://i.ibb.co/Vp0GMb5/Mobile-Router-Setup.jpg)
![](https://i.ibb.co/FmrpLTc/Network.jpg)
Please advice
Thank you
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
-
Less
More
- Posts: 2825
- Thank you received: 0
28 Aug 2019 13:56 #2
by admin
Forum Administrator
Replied by admin on topic Re: Configure LAN to LAN using 4G IP Passthought
The IP address your 'main' router is setting is a non-routable CGNAT (10.x.x.x) address so you're not going to be able to host any public service, including a VPN on that. It could do dial-out, depending what's at the other end.
Forum Administrator
Please Log in or Create an account to join the conversation.
Copyright © 2024 DrayTek