Hi,

Following the instructions here https://www.draytek.co.uk/support/guides/kb-vpnservice-expressvpn all the traffic is sent via the VPN, which not expected or desired. Is there a fault with the instructions or the Draytek?

Using 2860, firmware 3.9.0

The way I read that guide (which may be wrong), is that it is showing that Route Policy is the tool to use - but they haven't given a specific example (they've just used it to send everything).

You have to specify the criteria for the data you want to send over the VPN...

I think setting the remote networks to 0.0.0.0 ( = everything) is the issue. If you set it very specifically and then use route policy to
specific specific clients to use it, it should work.

admin wrote:
I think setting the remote networks to 0.0.0.0 ( = everything) is the issue. If you set it very specifically and then use route policy to
specific specific clients to use it, it should work.

Yes that does make a difference to the routing, so the instructions on Draytek's website are incorrect>? Express VPN doesn't work if you set it to anything other than 0.0.0.0.

I have found that changing the routing priority also has the desired affect, however.

Bug in the current firmware to do with VPN and routing. The only solution was to roll back to old firmware (for my 2862 3.9.4.1_BT, this was the last working version.)