Hi

I have a house 4 floors on it, the draytek 2820n is on the ground floor.

I was going to have two AP-800 cabled up in the roof and then the other 5 dotted around the house to boost the signal - these will not be wired.

How do I start? What is the best way

I understand on cable ones in the roof I just setup the SSID on the AP800 excatly the same as the 2820n so techinically have another two SSIDS running in the house with the same SSID - (please shout if thats not correct)

For the Wireless ones, does the SSID have to be setup as they are boosting the signal and feeding back to the 2820n, or the another wired AP800s in the roof...

and what changes do I ahve to do to the 2820n and the two wired ap800 in the roof to say that the wireless ap800 are there... Im sorry for the confusing message if it doesn't make sense please get back to me.., but because there are so many options I'm getting very confused....

I thought I would have to use the unversial repeater option on all - but I may be wrong - is there a step to step guide for this?!

Many thanks for any help on this - this could save me some time!

Geoff