Hi all, sorry if this has been discussed before.

I want to simply give some guest Wifi access on a second SSID on a 2820n. The problem is the Isolate LAN option is missing. I think I am probably missing something obvious here.

FW is 3.3.3_232201

I am limited on my access to update FW so hopefully this is not the case!

Any help much appreciated. Carl.

It got moved to the LAN - VLAN section in the newer firmware
You can setup VLAN0 to have all the LAN ports and SSID1 and VLAN1 can have SSID2 to separate them.

Great, that makes sense so will give it a go. Many thanks, Carl.

Voodle wrote: It got moved to the LAN - VLAN section in the newer firmware
You can setup VLAN0 to have all the LAN ports and SSID1 and VLAN1 can have SSID2 to separate them.

thanks. I have tried this and the 2 vlans are isolated. the problem i have is that the dhcp is disabled on the router and my dhcp server is on vlan 0. how can i tell the router that all devices connecting on vlan1 (i.e all my guest Wifi devices) should all get their IP configuration from the router.

regards