zimma wrote:
My mistake, sorry it was an AP810

Ah - makes more sense

zimma wrote:
In the morning a wireless scan showed the AP902's wifi was actually running on the wrong channel. The 5GHz channel in the 2762 and the 902 are fixed to allow WDS to work. So obviously when the AP902 switched channel, the WDS link went down.

Could this be due to DFS/Radar Detection? (See here )

I had something similar going on with my AP903/AP802 pair. It was very intermittent (probably due to the offending Radar station being just over the brow of a hill (and ten miles away).

I only found it via SYSLOG - nothing appeared in the Web GUI to indicate why it had switched channels...

Do the 1.3.2 Release Notes happen to mention any related change?

I had considered DFS as it is using a DFS channel.

Nothing in release notes. 1.3.2 has changes to SNMP and web gui.

I've been running 1.3.1 for a few days now and it is solid.

If I get some time I may pop 1.3.2 back on and monitor syslog for any DFS related chatter but for now I'll just stick with 1.3.1.