DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

AP802 Upgrade failure (to 1.4.3)

More
24 Mar 2022 08:32 #7 by piste basher
Replied by piste basher on topic Re: AP802 Upgrade failure (to 1.4.3)
I see that 1.4.4 is on the international site

Please Log in or Create an account to join the conversation.

  • hornbyp
  • Topic Author
  • User
  • User
More
24 Mar 2022 11:59 #8 by hornbyp
Replied by hornbyp on topic Re: AP802 Upgrade failure (to 1.4.3)

Piste Basher wrote:
I see that 1.4.4 is on the international site



Complete with very strange amendment...

Draytek wrote: Improved: Add a note and a pop-up alert to notify the user not to enable Management VLAN when using the Mesh function.



When I was using Mesh, I definitely had the Management VLAN enabled (and working). It wouldn't have occurred to me to not enable it - given the presence of 3 tagged VLANs ...

Please Log in or Create an account to join the conversation.

  • hornbyp
  • Topic Author
  • User
  • User
More
24 Mar 2022 15:18 #9 by hornbyp
Replied by hornbyp on topic Re: AP802 Upgrade failure (to 1.4.3)
Maybe the UK Web Site has been abandoned :wink: :?:

If I downgrade all the way to 1.4.1, the GUI upgrade procedure still sees 1.4.4 (in Taiwan).

Please Log in or Create an account to join the conversation.

More
30 Mar 2022 13:06 #10 by admin3
Replied by admin3 on topic Re: AP802 Upgrade failure (to 1.4.3)
1.4.3 had a bug with the login page that was bad enough that it was skipped. 1.4.4 is coming soon on the UK site :)

In the meantime, you can use the 1.4.4 firmware from the international site just fine, it just doesn't have the UK release notes yet or the UK testing that's done. It's only for the DSL routers where the origin of the firmware particularly matters.

Forum Administrator

Please Log in or Create an account to join the conversation.

  • hornbyp
  • Topic Author
  • User
  • User
More
11 Apr 2022 01:20 #11 by hornbyp
Replied by hornbyp on topic Be still, my beating heart :-)
After only 2½ months the two web sites are now in line :roll:

But it was well worth the wait ...
they translated the cryptic "Added master AP group ID and group key" into :-

Added master AP group ID and group key for use with AP-based AP management. This adds
the ‘Reset’ button to the [Central AP Management] > [General Setup] page, to allow the AP
to leave a management group.



So that makes it clear :lol:

It should have been obvious to anyone, that "Added master AP group ID and group key" was just another way of saying "Added a RESET button"...

Please Log in or Create an account to join the conversation.