DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
960 disconnect log explanation
- brightonrob
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 14
- Thank you received: 0
26 Aug 2022 14:15 #1
by brightonrob
960 disconnect log explanation was created by brightonrob
Hello
I have a recently purchased 960, the set up is 960 wireless 5mhz uplink with a preference to an 802 which is wired to a 903 root. The 960 and 802 are line of sight.
I had pain in terms of adding the 960 to the mesh, but got it done and its status was green, cfg sync etc and 10 (ish) minutes later it disconnected and this is the log
11:56:34 : [ 3635.183950] [dmn] set listen mode to NODE
11:56:38 : [ 3639.683530] wlan: [5539:I:ANY] ol_ath_vdev_install_key_send: 2742: Keyix=0 Keylen=16 Keyflags=0 Cipher=4
11:56:38 : [ 3639.683573] wlan: [5539:I:ANY] ol_ath_vdev_install_key_send: 2743: macaddr 00:1d:aa:3f:5b:4b
11:56:38 : [ 3639.705995] [dmn] set listen mode to LOST
11:56:38 : [ 3639.706490] [dmn] set listen mode to LOST
11:56:38 : [ 3639.734395] wlan: [0:I:CMN_MLME] vdev[0] ieee chan:11
11:56:38 : [ 3639.734785] wlan: [0:I:ANY] vdev[0]: Mgt Rate:1000(kbps)
11:56:38 : [ 3639.738537] wlan: [0:I:ANY] vdev[0]: Mgt Rate:1000(kbps)
11:56:38 : [ 3639.748268] wlan: [0:I:CMN_MLME] vdev[1] ieee chan:11
11:56:38 : [ 3639.749424] wlan: [0:I:ANY] vdev[1]: Mgt Rate:1000(kbps)
11:56:38 : [ 3639.754142] wlan: [0:I:ANY] vdev[1]: Mgt Rate:1000(kbps)
11:56:38 : [ 3639.802962] wlan: [0:I:CMN_MLME] vdev[5] ieee chan:136
11:56:38 : [ 3639.803094] DFS: Start DFS detection for channel 136. Please wait for 62 seconds.
11:56:38 : [ 3639.807029] DFS: While detecting, the selected channel will not be available for using.
11:56:38 : [ 3639.814847] wlan: [0:I:ANY] vdev[5]: Mgt Rate:6000(kbps)
11:56:38 : [ 3639.822387] wlan: [0:I:ANY] vdev[5]: Mgt Rate:6000(kbps)
11:57:00 : [ 3661.198944] wlan: [4921:I:ANY] ol_ath_vdev_install_key_send: 2742: Keyix=2 Keylen=16 Keyflags=1 Cipher=4
11:57:00 : [ 3661.198988] wlan: [4921:I:ANY] ol_ath_vdev_install_key_send: 2743: macaddr 1a:49:bc:44:6e:3b
11:57:01 : [ 3662.929762] wlan: [680:I:ANY] ol_ath_vdev_install_key_send: 2742: Keyix=2 Keylen=16 Keyflags=1 Cipher=4
11:57:01 : [ 3662.929806] wlan: [680:I:ANY] ol_ath_vdev_install_key_send: 2743: macaddr 26:49:bc:44:6e:3a
11:57:03 : [ 3664.744145] wlan: [5924:I:ANY] ol_ath_vdev_install_key_send: 2742: Keyix=2 Keylen=16 Keyflags=1 Cipher=4
11:57:03 : [ 3664.744188] wlan: [5924:I:ANY] ol_ath_vdev_install_key_send: 2743: macaddr 14:49:bc:44:6e:3a
11:57:04 : [ 3665.450560] wlan: [5924:I:ANY] ol_ath_vdev_install_key_send: 2742: Keyix=2 Keylen=16 Keyflags=1 Cipher=4
11:57:04 : [ 3665.450603] wlan: [5924:I:ANY] ol_ath_vdev_install_key_send: 2743: macaddr 1a:49:bc:44:6e:3a
11:58:14 : [ 3736.058355] wlan: [680:I:ANY] ol_ath_vdev_install_key_send: 2742: Keyix=2 Keylen=16 Keyflags=1 Cipher=4
11:58:14 : [ 3736.058399] wlan: [680:I:ANY] ol_ath_vdev_install_key_send: 2743: macaddr 26:49:bc:44:6e:3b
960 Disconnects but using a wire I can connect to GUI node but its still disconnected
Can anyone translate this, or point me to the problem(s).
Many thanks
I have a recently purchased 960, the set up is 960 wireless 5mhz uplink with a preference to an 802 which is wired to a 903 root. The 960 and 802 are line of sight.
I had pain in terms of adding the 960 to the mesh, but got it done and its status was green, cfg sync etc and 10 (ish) minutes later it disconnected and this is the log
11:56:34 : [ 3635.183950] [dmn] set listen mode to NODE
11:56:38 : [ 3639.683530] wlan: [5539:I:ANY] ol_ath_vdev_install_key_send: 2742: Keyix=0 Keylen=16 Keyflags=0 Cipher=4
11:56:38 : [ 3639.683573] wlan: [5539:I:ANY] ol_ath_vdev_install_key_send: 2743: macaddr 00:1d:aa:3f:5b:4b
11:56:38 : [ 3639.705995] [dmn] set listen mode to LOST
11:56:38 : [ 3639.706490] [dmn] set listen mode to LOST
11:56:38 : [ 3639.734395] wlan: [0:I:CMN_MLME] vdev[0] ieee chan:11
11:56:38 : [ 3639.734785] wlan: [0:I:ANY] vdev[0]: Mgt Rate:1000(kbps)
11:56:38 : [ 3639.738537] wlan: [0:I:ANY] vdev[0]: Mgt Rate:1000(kbps)
11:56:38 : [ 3639.748268] wlan: [0:I:CMN_MLME] vdev[1] ieee chan:11
11:56:38 : [ 3639.749424] wlan: [0:I:ANY] vdev[1]: Mgt Rate:1000(kbps)
11:56:38 : [ 3639.754142] wlan: [0:I:ANY] vdev[1]: Mgt Rate:1000(kbps)
11:56:38 : [ 3639.802962] wlan: [0:I:CMN_MLME] vdev[5] ieee chan:136
11:56:38 : [ 3639.803094] DFS: Start DFS detection for channel 136. Please wait for 62 seconds.
11:56:38 : [ 3639.807029] DFS: While detecting, the selected channel will not be available for using.
11:56:38 : [ 3639.814847] wlan: [0:I:ANY] vdev[5]: Mgt Rate:6000(kbps)
11:56:38 : [ 3639.822387] wlan: [0:I:ANY] vdev[5]: Mgt Rate:6000(kbps)
11:57:00 : [ 3661.198944] wlan: [4921:I:ANY] ol_ath_vdev_install_key_send: 2742: Keyix=2 Keylen=16 Keyflags=1 Cipher=4
11:57:00 : [ 3661.198988] wlan: [4921:I:ANY] ol_ath_vdev_install_key_send: 2743: macaddr 1a:49:bc:44:6e:3b
11:57:01 : [ 3662.929762] wlan: [680:I:ANY] ol_ath_vdev_install_key_send: 2742: Keyix=2 Keylen=16 Keyflags=1 Cipher=4
11:57:01 : [ 3662.929806] wlan: [680:I:ANY] ol_ath_vdev_install_key_send: 2743: macaddr 26:49:bc:44:6e:3a
11:57:03 : [ 3664.744145] wlan: [5924:I:ANY] ol_ath_vdev_install_key_send: 2742: Keyix=2 Keylen=16 Keyflags=1 Cipher=4
11:57:03 : [ 3664.744188] wlan: [5924:I:ANY] ol_ath_vdev_install_key_send: 2743: macaddr 14:49:bc:44:6e:3a
11:57:04 : [ 3665.450560] wlan: [5924:I:ANY] ol_ath_vdev_install_key_send: 2742: Keyix=2 Keylen=16 Keyflags=1 Cipher=4
11:57:04 : [ 3665.450603] wlan: [5924:I:ANY] ol_ath_vdev_install_key_send: 2743: macaddr 1a:49:bc:44:6e:3a
11:58:14 : [ 3736.058355] wlan: [680:I:ANY] ol_ath_vdev_install_key_send: 2742: Keyix=2 Keylen=16 Keyflags=1 Cipher=4
11:58:14 : [ 3736.058399] wlan: [680:I:ANY] ol_ath_vdev_install_key_send: 2743: macaddr 26:49:bc:44:6e:3b
960 Disconnects but using a wire I can connect to GUI node but its still disconnected
Can anyone translate this, or point me to the problem(s).
Many thanks
Please Log in or Create an account to join the conversation.
- piste basher
- Offline
- Big Contributor
-
Less
More
- Posts: 1162
- Thank you received: 2
26 Aug 2022 15:45 #2
by piste basher
Replied by piste basher on topic Re: 960 disconnect log explanation
I forgot to mention on the other thread that I use Channel 48. I seem to recall that I had problems if I tried to use the DFS channels. Maybe try that?
Please Log in or Create an account to join the conversation.
- brightonrob
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 14
- Thank you received: 0
26 Aug 2022 15:55 #3
by brightonrob
Replied by brightonrob on topic Re: 960 disconnect log explanation
Interesting I also saw from draytek don't use channel 36 on 5 MHz...I was using 136
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek