DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
IPv6
- utis
- Topic Author
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
14 Sep 2007 19:51 #44941
by utis
IPv6 was created by utis
Would you please give us a bit more specific timetable/estimates/plans about IPv6 implementation. Whether IPv6 will be supported later by a new firmware on the 2800 platform or will there have to be completely new platform? Exactly whic rfcs will be supported? Many of our customers are preparing for IPv6 overhaul which is coming with many countries and RIR's formally puting deadlines for IPv6, from US to China.. We are going to buy "IPv6 supported devices only" very soon and thus all information regarding implementation in Vigor devices would be appreciated as we are very keen to continue quality experience using draytek hardware.
Please Log in or Create an account to join the conversation.
- will177
- Offline
- New Member
Less
More
- Posts: 3
- Thank you received: 0
28 Nov 2008 09:22 #53116
by will177
Replied by will177 on topic IPv6
What's the latest news on IPv6 support in Draytek routers?
I have the Vigor 2820n
Thanks.
I have the Vigor 2820n
Thanks.
Please Log in or Create an account to join the conversation.
- middling
- Offline
- Junior Member
Less
More
- Posts: 35
- Thank you received: 0
29 Nov 2008 14:53 #53135
by middling
Replied by middling on topic IPv6
With only another two years until IPv4 address exhaustion Draytek, and other manufacturers, really need to pull their fingers out and get things moving.
Unfortunately no manufacturers really seem to be on the ball with this.
Unfortunately no manufacturers really seem to be on the ball with this.
Please Log in or Create an account to join the conversation.
- wellard1981
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
02 Dec 2008 22:16 #53185
by wellard1981
That's because ISPs are not pushing IPv6, until that happens and most of the Internet is IPv6, there's not much call for it.
Replied by wellard1981 on topic IPv6
Unfortunately no manufacturers really seem to be on the ball with this.
That's because ISPs are not pushing IPv6, until that happens and most of the Internet is IPv6, there's not much call for it.
Please Log in or Create an account to join the conversation.
- kalnet4u
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
23 Dec 2008 10:42 #53501
by kalnet4u
Chicken and Egg spring to mind.
Replied by kalnet4u on topic IPv6
wellard1981 wrote:
Unfortunately no manufacturers really seem to be on the ball with this.
That's because ISPs are not pushing IPv6, until that happens and most of the Internet is IPv6, there's not much call for it.
Chicken and Egg spring to mind.
Please Log in or Create an account to join the conversation.
- gerrylawrence
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
15 Sep 2009 18:49 #57740
by gerrylawrence
Cisco already have a fully working IPv6 ADSL router (87x series), so it is out there, but expensive.
Many ISP networks are already running IPv6 internally, so the ball is firmly in the court of the router manufacturers to get their code updated and release IPv6 functionality built in. I know several Network Mangers who have been chasing this, but so far it's a pretty limited response from the hardware vendors.
Please DrayTek - give us some idea that you are at least working on it, and ideally dates.
Thanks
Replied by gerrylawrence on topic IPv6
kalnet4u wrote:
wellard1981 wrote:
Unfortunately no manufacturers really seem to be on the ball with this.
That's because ISPs are not pushing IPv6, until that happens and most of the Internet is IPv6, there's not much call for it.
Chicken and Egg spring to mind.
Cisco already have a fully working IPv6 ADSL router (87x series), so it is out there, but expensive.
Many ISP networks are already running IPv6 internally, so the ball is firmly in the court of the router manufacturers to get their code updated and release IPv6 functionality built in. I know several Network Mangers who have been chasing this, but so far it's a pretty limited response from the hardware vendors.
Please DrayTek - give us some idea that you are at least working on it, and ideally dates.
Thanks
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek