DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
vigor 100 annex m?
- louis-m
- Offline
- Member
-
Less
More
- Posts: 131
- Thank you received: 0
16 May 2009 15:55 #13
by louis-m
2820 = 3.3.2_RC5
2950 = 3.2.4
Replied by louis-m on topic vigor 100 annex m?
as stated, you can only do it via a secondary connection which is on the same subnet as the modem private ip. you cannot do it via the wan.
2820 = 3.3.2_RC5
2950 = 3.2.4
Please Log in or Create an account to join the conversation.
- gilesw
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 10
- Thank you received: 0
17 May 2009 20:04 #14
by gilesw
Replied by gilesw on topic vigor 100 annex m?
hiya louis I've tried plugging into the vigor directly on the 192.168.1.x subnet, and 2. I can't see the device. I seem to remember seeing that when in bridging mode only one port of the vigor can be used. Mebe I have to disconnect the wan link to the linksys..
g.
g.
Please Log in or Create an account to join the conversation.
- louis-m
- Offline
- Member
-
Less
More
- Posts: 131
- Thank you received: 0
17 May 2009 21:06 #15
by louis-m
2820 = 3.3.2_RC5
2950 = 3.2.4
Replied by louis-m on topic vigor 100 annex m?
i can see the web interface on all of my 100's when in bridging mode with the method described.
the 100's are on a different subnet to the lan of the 2950 they are connected to.
so i have 2 x 100's going into the 2 x wan ports of a 2950 and 2 x cat5 from each 100 going into a vlan'd switch.
the 100's are on a different subnet to the lan of the 2950 they are connected to.
so i have 2 x 100's going into the 2 x wan ports of a 2950 and 2 x cat5 from each 100 going into a vlan'd switch.
2820 = 3.3.2_RC5
2950 = 3.2.4
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek