DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Be Unlimited Internet 24meg and 2820n

  • sohail579
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
01 Jan 2010 03:17 #59566 by sohail579
Be Unlimited Internet 24meg and 2820n was created by sohail579
Hi

Is there anyone out there using this combo??

what settings have you used??

whats your SNR? mine is only 6 but have been reading that it should be much higher...

whats you Loop Att.? mine is 24 have read that should be lower??

also my old netgear used to sync slighter faster at the moment im syncing:
down: 14mb
up: 1mb

on the netgear used to get
down: 16mb
up: 1.3mb

whats your experience??

Please Log in or Create an account to join the conversation.

More
01 Jan 2010 18:24 #59574 by rxt_ian
Replied by rxt_ian on topic Re: Be Unlimited Internet 24meg and 2820n
The attenuation will be different for each phone line, and although lower is better, only the line distance to your exchange will tell you what its supposed to be.

The signal to noise ratio is a trade off between sync speed and stability. 6db is the normal compromise. On a given line you can slow the sync speed to increase the snr or increase the sync speed to decrease the snr, the router will find which sync speed gives a snr of 6db

Please Log in or Create an account to join the conversation.

More
19 Jan 2010 08:49 #59927 by carll
Replied by carll on topic Re: Be Unlimited Internet 24meg and 2820n
I am on the top Be service.
am getting 14,310,000 download and 2,261,000 upload.
SNR margin = 6
Loop Att. = 29
The service is used hard 24/7/365, have to reboot on average once a week.

Regards
Carl.



sohail579 wrote: Hi

Is there anyone out there using this combo??

what settings have you used??

whats your SNR? mine is only 6 but have been reading that it should be much higher...

whats you Loop Att.? mine is 24 have read that should be lower??

also my old netgear used to sync slighter faster at the moment im syncing:
down: 14mb
up: 1mb

on the netgear used to get
down: 16mb
up: 1.3mb

whats your experience??


Please Log in or Create an account to join the conversation.

More
20 Jan 2010 15:34 #59948 by iain
Replied by iain on topic Be Unlimited Internet 24meg and 2820n
Taken from the Web GUI (don't have access to CLI at the moment):

ADSL Status Mode State Up Speed Down Speed SNR Margin Loop Att.
G.992.5 annexM SHOWTIME 2609000 21463000 2 15

Please Log in or Create an account to join the conversation.

More
23 Jan 2010 19:53 #60008 by dbames
Replied by dbames on topic 20mbit on o2
These are my current stats (20mbit on o2) with a 2820Vn:
Code:
--------------------------- ATU-R Info (hw: annex A, f/w: annex A) ----------- Running Mode : ADSL2+(G.992.5) State : SHOWTIME DS Actual Rate : 19008000 bps US Actual Rate : 1209000 bps DS Attainable Rate : 18404000 bps US Attainable Rate : 1209000 bps DS Path Mode : Fast US Path Mode : Fast DS Interleave Depth : 352 US Interleave Depth : 1 NE Current Attenuation : 16 dB Cur SNR Margin : 5 dB DS actual PSD : 14. 2 dB US actual PSD : 12. 2 dB ADSL Firmware Version : 232201_A -------------------------------- ATU-C Info --------------------------------- Far Current Attenuation : 3 dB Far SNR Margin : 6 dB CO ITU Version[0] : 00004244 CO ITU Version[1] : 0000434d DSLAM CHIPSET VENDOR : < BDCM >

I find this stable and can't recall the last time the line dropped sync (System Uptime:1393:11:56 and adsl1 is the same).

Please Log in or Create an account to join the conversation.

More
28 Jan 2010 15:10 #60135 by joelang1699
Replied by joelang1699 on topic Be Unlimited Internet 24meg and 2820n
how did you get that status info as i would like to check mine?

Please Log in or Create an account to join the conversation.

Moderators: Sami