DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2820 FTTC VDSL
- jedi98
- Offline
- Member
Less
More
- Posts: 186
- Thank you received: 0
25 Jan 2011 17:49 #65851
by jedi98
Replied by jedi98 on topic FTTC 2820 config
I have successfully set up two of these on Plus.net FTTC trial, here's what I did: -
And that was it mostly.
My ISP is plusnet but the FTTC VDSL is provided by BT, as are most of the FTTC offerings.
* WAN >> General: Disable WAN1, enable WAN2, Name it, mode:Ethernet, Auto Negotiation, Always on
* OK
* WAN >> Internet Access: WAN1 (PPPoA): disable
* OK (may reboot)
* WAN >> Internet Access: WAN2 (PPPoE): enable, set username & password, leave the rest as default.
* OK (may reboot)
And that was it mostly.
>> If you use QoS you may need to set that for WAN2 & when you know your bandwidth up/down, set it in QoS WAN2.
My ISP is plusnet but the FTTC VDSL is provided by BT, as are most of the FTTC offerings.
Please Log in or Create an account to join the conversation.
- bergerc
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
26 Jan 2011 22:03 #65887
by bergerc
Replied by bergerc on topic 2820 FTTC VDSL
Thanks for the info - that's pretty much what I did and it's working nicely. I had a bit of a problem with keeping a stable connection to the wireless network after making those changes but an upgrade to firmware 3.3.3 (had been on 3.2.1 before) and a bit of tweaking of the settings eventually got it working again.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek