DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Just bought a 2920 but cant find firmware?
- the pit
- Offline
- Member
Less
More
- Posts: 409
- Thank you received: 0
15 Jun 2010 18:34 #62366
by the pit
Replied by the pit on topic Just bought a 2920 but cant find firmware?
Just upgraded to 3.3.3 but there isn't changes to the interface. What version have you got?
Please Log in or Create an account to join the conversation.
- rajkumar
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
- tgold
- Offline
- Junior Member
Less
More
- Posts: 45
- Thank you received: 0
19 Jun 2010 18:41 #62418
by tgold
BTW what are people using for failover detect? ARP detect takes a full minute but ping detect notices the WAN is down in just 15 seconds. I am now pinging 8.8.8.8, a Google DNS server, but would welcome other suggestions for very robustly reliable fixed IP addresses.
Tony
Replied by tgold on topic Just bought a 2920 but cant find firmware?
Ditto. I need the LAN/Static Route feature but that screen just ain't there.I'm surprised the product went out with duff firmware! I hope they get a new version out soon.RajKumar wrote:
BTW what are people using for failover detect? ARP detect takes a full minute but ping detect notices the WAN is down in just 15 seconds. I am now pinging 8.8.8.8, a Google DNS server, but would welcome other suggestions for very robustly reliable fixed IP addresses.
Tony
Please Log in or Create an account to join the conversation.
- i.clark
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
19 Jun 2010 19:42 #62420
by i.clark
I got the RC firmware by contacting support as the teleworker configuration didn't work for me. It took a couple of hours for them to respond which is pretty good. I've not had any problems yet, but there must be a reason it's not released yet! The differences I've noted:
"LAN > General Setup" 2nd Subnet. (untested by me)
"LAN > Static Route" UI (untested by me)
"Bandwidth Management > Sessions Limit" UI (used to not save settings)
"Bandwidth Management > Quality of Service" UI (Untested by me)
"Applications > RADIUS" UI (untested by me)
"VPN > VPN Server Wizard" now works for teleworker as well as lan-to-lan
"VPN > Remote Access Control" UI (works)
"VPN > PPP General Setup" (untested by me)
"VPN > IPSec General Setup" UI (works)
"VPN > Remote Dial-in User" UI (works)
Data flow manager still doesn't seem to do anything for me.
I believe the google dns server is multi-homed so is quite a good choice.
V2920 (as vpn g/w) + V2920n (remote site, linked by ethernet + vpn)
Replied by i.clark on topic Just bought a 2920 but cant find firmware?
Ditto. I need the LAN/Static Route feature but that screen just ain't there.tgold wrote:
I got the RC firmware by contacting support as the teleworker configuration didn't work for me. It took a couple of hours for them to respond which is pretty good. I've not had any problems yet, but there must be a reason it's not released yet! The differences I've noted:
"LAN > General Setup" 2nd Subnet. (untested by me)
"LAN > Static Route" UI (untested by me)
"Bandwidth Management > Sessions Limit" UI (used to not save settings)
"Bandwidth Management > Quality of Service" UI (Untested by me)
"Applications > RADIUS" UI (untested by me)
"VPN > VPN Server Wizard" now works for teleworker as well as lan-to-lan
"VPN > Remote Access Control" UI (works)
"VPN > PPP General Setup" (untested by me)
"VPN > IPSec General Setup" UI (works)
"VPN > Remote Dial-in User" UI (works)
Data flow manager still doesn't seem to do anything for me.
tgold wrote:
BTW what are people using for failover detect? ARP detect takes a full minute but ping detect notices the WAN is down in just 15 seconds. I am now pinging 8.8.8.8, a Google DNS server, but would welcome other suggestions for very robustly reliable fixed IP addresses.
Tony
I believe the google dns server is multi-homed so is quite a good choice.
V2920 (as vpn g/w) + V2920n (remote site, linked by ethernet + vpn)
Please Log in or Create an account to join the conversation.
- tgold
- Offline
- Junior Member
Less
More
- Posts: 45
- Thank you received: 0
19 Jun 2010 19:58 #62421
by tgold
Replied by tgold on topic Just bought a 2920 but cant find firmware?
This is all rather odd; could there be multiple variants of firmware around? My 2920 arrived from SEG factory shrink wrapped and with 3.3.2.3 showing a build date of Mar 2 2010 13:09:28 in place, and the VPN PPTP server works a treat for me with Windows XP clients.
Thanks for the comments on the ping target.
Thanks for the comments on the ping target.
Please Log in or Create an account to join the conversation.
- the pit
- Offline
- Member
Less
More
- Posts: 409
- Thank you received: 0
19 Jun 2010 20:32 #62422
by the pit
Replied by the pit on topic Just bought a 2920 but cant find firmware?
Well the latest firmware fixed a problem I hadn't noticed due to load balancing.
The 2920 kept dropping the connection to the vigour 120. So I logged onto the 120 and it had been up for 400 odd hours so clearly a prob with the 2920.
So I decided to Flash it and bingo fixed the problem.
The 2920 kept dropping the connection to the vigour 120. So I logged onto the 120 and it had been up for 400 odd hours so clearly a prob with the 2920.
So I decided to Flash it and bingo fixed the problem.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek