DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2820n 3.3.4 DHCP bug?
- mph
- Offline
- Junior Member
Less
More
- Posts: 30
- Thank you received: 0
02 Jul 2010 13:49 #62646
by mph
Replied by mph on topic 2820n 3.3.4 DHCP bug?
There's definitely a bug in 3.3.4 DHCP. I've got a problem with it not giving out bound IP addresses after a while.
Please Log in or Create an account to join the conversation.
- anoracknophobia
- Offline
- Junior Member
Less
More
- Posts: 11
- Thank you received: 0
02 Jul 2010 23:47 #62661
by anoracknophobia
Replied by anoracknophobia on topic 2820n 3.3.4 DHCP bug?
same here ..since 3.3.4 not giving out IP addresses to devices identified in the the 'bound to mac' list.
Also, 2820 appears to be totally screwed this evening ...
got 3 green LEDs on LHS alght for about 10sceonds, and NO lan link LEDS on the RJ45's
then..
all link LEDS flash on briefly..
then
all nine LEDs on the LHS flash on then off ( twice ?) together
then get ACT and QoS LEDs on briefly...
then the cylce repeats
I cant log into the router to see whats going on .... tried factory reset.. no joy
Also, 2820 appears to be totally screwed this evening ...
got 3 green LEDs on LHS alght for about 10sceonds, and NO lan link LEDS on the RJ45's
then..
all link LEDS flash on briefly..
then
all nine LEDs on the LHS flash on then off ( twice ?) together
then get ACT and QoS LEDs on briefly...
then the cylce repeats
I cant log into the router to see whats going on .... tried factory reset.. no joy
Please Log in or Create an account to join the conversation.
- mph
- Offline
- Junior Member
Less
More
- Posts: 30
- Thank you received: 0
05 Jul 2010 11:15 #62695
by mph
Replied by mph on topic 2820n 3.3.4 DHCP bug?
Support have suggested taking out machines from the bind-to-mac list. Tried this and they immediately got a DHCP address.
Roll on 3.3.5
Roll on 3.3.5
Please Log in or Create an account to join the conversation.
- benji
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 44
- Thank you received: 0
05 Jul 2010 17:26 #62708
by benji
Replied by benji on topic 2820n 3.3.4 DHCP bug?
Seems to be the only workaround (other than 3.3.3!)
I have noticed the "NAT Active Sessions Table" still had dozens of entries for a computer that was disconnected from the VPN 2 hours earlier - so I think there are a few bugs that need sorting out...
I have noticed the "NAT Active Sessions Table" still had dozens of entries for a computer that was disconnected from the VPN 2 hours earlier - so I think there are a few bugs that need sorting out...
Please Log in or Create an account to join the conversation.
- howard simpson
- Offline
- Member
Less
More
- Posts: 192
- Thank you received: 0
06 Jul 2010 10:31 #62722
by howard simpson
Howard
Replied by howard simpson on topic 2820n 3.3.4 DHCP bug?
Still on 3.3.4 and have checked the the NAS box sys log, it is getting its DHCP renewed with no problems every 36h! It is still in the bind IP to MAC table in the 2820 at 192.168.1.10 and the start IP address is 192.168.1.10.
Howard
Please Log in or Create an account to join the conversation.
- mph
- Offline
- Junior Member
Less
More
- Posts: 30
- Thank you received: 0
06 Jul 2010 10:38 #62723
by mph
Seems to be a problem with devices that come and go, rather than just regular renewals. I've got problems with laptops (some are wired only) and (cough) iPhones that are coming and going from offices.
Replied by mph on topic 2820n 3.3.4 DHCP bug?
Still on 3.3.4 and have checked the the NAS box sys log, it is getting its DHCP renewed with no problems every 36h! It is still in the bind IP to MAC table in the 2820 at 192.168.1.10 and the start IP address is 192.168.1.10.Howard Simpson wrote:
Seems to be a problem with devices that come and go, rather than just regular renewals. I've got problems with laptops (some are wired only) and (cough) iPhones that are coming and going from offices.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek