DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2920n Remote Management from Internet
- davidthornton
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 30
- Thank you received: 0
15 Jan 2011 16:30 #65684
by davidthornton
2920n Remote Management from Internet was created by davidthornton
Has anyone managed to get remote managament from the Internet working with a 2920n? I've installed the latest firmware version but no amount of trying has got this working. Even if I uncheck "disable pings from the Internet", I am still not getting ICMP replies. I've added my static IP to an access list but I am still only able to manage the router using remote access software via a PC that is local to it.
Please Log in or Create an account to join the conversation.
- rancid-lemon
- Offline
- New Member
Less
More
- Posts: 8
- Thank you received: 0
24 Jan 2011 16:49 #65826
by rancid-lemon
Replied by rancid-lemon on topic 2920n Remote Management from Internet
Same issue here will let you know if I manage to get anywhere with it.
Do report back if you find a solution.
rancid
Do report back if you find a solution.
rancid
Please Log in or Create an account to join the conversation.
- davidthornton
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 30
- Thank you received: 0
24 Jan 2011 19:07 #65829
by davidthornton
I'm currently working with Draytek support directly, via email, after raising a ticket about this issue (as well as other speed related issues relating to my 3300V).
I've managed to get remote admin working with WAN1, which uses DHCP to a Virgin Media Super Hub for Cable (after forwarding the port I wanted to use for remote admin through the Super Hub), but not with WAN2, which uses PPoE to connect to a Vigor 100 for ADSL.
Replied by davidthornton on topic 2920n Remote Management from Internet
Same issue here will let you know if I manage to get anywhere with it.rancid-lemon wrote:
Do report back if you find a solution.
rancid
I'm currently working with Draytek support directly, via email, after raising a ticket about this issue (as well as other speed related issues relating to my 3300V).
I've managed to get remote admin working with WAN1, which uses DHCP to a Virgin Media Super Hub for Cable (after forwarding the port I wanted to use for remote admin through the Super Hub), but not with WAN2, which uses PPoE to connect to a Vigor 100 for ADSL.
Please Log in or Create an account to join the conversation.
- rancid-lemon
- Offline
- New Member
Less
More
- Posts: 8
- Thank you received: 0
24 Jan 2011 23:00 #65831
by rancid-lemon
Replied by rancid-lemon on topic 2920n Remote Management from Internet
Ok I am in a similar situation as with your WAN2
My case:
ADSL - Vigor 120 - WAN1 2920n
120 - PPPoA PPPoE bridge - ie default settings - untouched.
Appreciate any feedback.
rancid
My case:
ADSL - Vigor 120 - WAN1 2920n
120 - PPPoA PPPoE bridge - ie default settings - untouched.
Appreciate any feedback.
rancid
Please Log in or Create an account to join the conversation.
- davidthornton
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 30
- Thank you received: 0
25 Feb 2011 01:30 #66453
by davidthornton
Replied by davidthornton on topic Re: 2920n Remote Management from Internet
I've still not managed to do remote management from the Internet via WAN2 on the 2920n. The last thing I heard from the support technician at Draytek UK was that he was going to test it with his. Not heard anything back so should probably send him an email to find out.
Please Log in or Create an account to join the conversation.
- rancid-lemon
- Offline
- New Member
Less
More
- Posts: 8
- Thank you received: 0
25 Feb 2011 04:12 #66455
by rancid-lemon
Replied by rancid-lemon on topic Re: 2920n Remote Management from Internet
Thank you for the update, appreciated.
rancid
rancid
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek